Table des Matières
Publicité
A
A. 27 mm
Tightening torque:
Chain adjuster locknut:
15.5 Nm (1.55 m0kg)
Axle holding bolts (upper):
85 Nm (8.5 m0kg)
Axle holding bolts (lower):
60 Nm (6.0 m0kg)
5. Finger tighten the hub stopper bolt and tight-
en the hub stopper bolt locknut.
Tightening torque:
Hub stopper bolt locknut
15.5 Nm (1.55 m0kg)
cC
If measurement A of the chain adjuster is
less than 27 mm, ask a Yamaha dealer to
replace the drive chain.
8-61
Publicité
Chapitres
Table des Matières
