Vertical Steaming; Dry Ironing - Domo DO7081S Mode D'emploi

DO7081S www.domo-elektro.be
The appliance is ready to use.
Press the Steam Button for steam ironing.
Turn the Temperature Dial on the iron unit in anti-clockwise direction to "Min" and
the iron is switched off.
Press the Power On/Off switch, the base console will switch to "Standby mode" with a
beep sound.
Disconnect the power cord from mains supply outlet.
When the appliance gets cool completely, store it in a safe place. For the power cord &
steam supply cord storage

VERTICAL STEAMING

This function provides steam to remove wrinkles on delicate garments in hanging
position, hanging curtains or other hanging fabric
Note:
Do not apply steam on any clothes or fabrics that are being worn by human or pets.
Temperature of steam is very high.
Maintain a distance of a few centimeters from delicate fabric (Synthetics, silk, velvet,
etc.), otherwise the fabric could be damaged.

DRY IRONING

Unwind and straighten the power cord and supply cord.
Connect the appliance to a suitable mains supply outlet.
"Beep" sound would be heard and the LCD would display all logos for a Second then
turn off.
Press the power On/Off button
The medium steam level and medium hard water level indicator will display in the
LCD with a beep sound.
The will blink to indicate; the base unit is heating up or cooling down.
Turn the Temperature Dial on the iron in clockwise direction; select '·' (1 dot), '··' (2
dots) or '···' (3 dots) according to the recommendation of garment label.
Pilot Light glow until the required temperature for the iron unit is reached.
Select the dry iron indicator ( ) by press the "-"LCD control button, a beep sound
would be heard for each LCD control button pressing.
If the steam generator has the steam pressure, the pressure indicator will display in the
LCD.
Pilot Light goes off when the required temperature for the iron unit is reached.
The appliance is ready to use.
Turn the temperature dial on the iron unit in anti-clockwise direction to "Min" and the
iron is switched off.
Press the Power On/Off switch, the base console will switch to "Standby mode" with a
beep sound.
Disconnect the power cord from mains supply outlet.
36