Operating Information - Domo DO7081S Mode D'emploi

DO7081S www.domo-elektro.be
LCD
A. Water Hardness Level Indicators
B. Boiler Clean Indicator
C. Base Unit Temperature Indicator
D. Pressure Level Indicator
E. Auto Shut off indicator
F. Water Refill Indicator
G. Steam Level Indicators
H. Steam Off Mode Indicator
HINT FOR IRONING
Sort out the articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for different garment.
Test ironing a small area on the backside or inside the garment if you are unsure about
the type of fabric. Start with a low temperature and increase gradually.
Wait for 2 minutes before ironing heat sensitive fabrics. Temperature adjustment needs
certain time to reach the required level no matter it is higher or lower.
Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to
prevent shine marks

OPERATING INFORMATION

The appliance has a high technology steam chamber, water is converted to steam
vapor in the chamber and transported to the iron unit through the supply cord.
HOW TO FILL WATER
The appliance has an electronic system to monitoring the water level. When the water
level is lower than the pre-set value, the icon will blink with beep sound until the
water is re-filled.
Disconnect the power cord from mains supply outlet.
Press the water tank release button and pull out the water tank.
Open the water inlet cover.
Fill water through the water inlet hole up to MAX level marked on the side of water
tank.
Close the water inlet cover
Replace the water tank in its place.
FIRST TIME IRONING
Remove any protective films or sticker from the soleplate and the cabinet, if any.
Unwind and straighten the power cord and supply cord.
Fill the water tank with tap water.
Connect the appliance to a suitable mains supply outlet.
"Beep" sound would be heard and the LCD would display all logos for a Second then
turn off.
34