Connections; Connecting Speakers And Other Components - Yamaha AX-497 Mode D'emploi

CONNECTIONS

Connecting speakers and other components

CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could
damage this unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Also, refer to the owner's manual for each of your components.
• Use RCA type pin plug cables for audio/video units except speakers.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, you may hear less noise without
the connection to the GND terminal for some record players.
•
Turntable
GND
Audio out
CD player or
DVD player
8
CONNECTIONS
Tuner
Audio out Audio out
R L
Audio out
R L
TUNER
IN
(PLAY)
TAPE
OUT
PHONO
(REC)
IN
GND
(PLAY)
MD
OUT
(REC)
AUX
CD/DVD
R L R L
Audio out Audio in
VCR, etc.
Tape deck, etc.
Audio in
R L
R L
+
+
A
B
+
R L
R L
Audio out
MD recorder,
etc.
Speakers A
– – +
SPEAKERS
– – +
– – +
Speakers B