Xoro HTL 2335HD Mode D'emploi page 96

Picture setting
When you uses the VGA input, than you have
several additional options for the adjustment of
the picture. These options are behind the setting
PC SETUP.
Press the ► button to get access to the PC
SETUP options. The sub-options are:
•
Auto Adjust
•
Horizontal Position
•
Vertical Position
•
Size
•
Phase
Auto Adjust
You can uses the Auto adjust option to
synchronizes the picture from the PC VGA port
in an optimal way. Press the ► button to
synchronizes the screen display.
Horizontal and Vertical Position
With these option you can adjust the VGA
picture manually on the screen. Press the ◄ or
► buttons and the picture shifts to high and
width.
Size
Press the ◄ or ► buttons to change the size of
the VGA picture on the screen, until a stable
image is obtained.
Phase
Use ◄ or ► buttons to adjust the phase of the ADC sampling clock relative to the H-sync signal, until
a stable image is obtained.
Save the new settings by pressing the MENU button.
To leave the setting press the EXIT button.
44
LCD Settings
HTL 2335HD