Vga; Usb Port; Headphone - Xoro HTL 2335HD Mode D'emploi

VGA

You can use the TV set as a PC monitor by using the VGA
interface. Please connect a VGA cable with the VGA input of
the TV set and with the PC.
With this kind of connection only video signals are
transmitted. For listening sound on the TV you should
establish also a sound connection. Please connect the white and red wire of the 2-pin component
cable with the AUDIO OUT (INPUT) and the stereo jack with the "PC-IN" plug of the TV set.
Please press the INPUT button and choose „PC-RGB" in the popup window. The VGA input is active.
Notes:
1. Before you connect the TV set with the PC, please change the graphic resolution of the PC
to: 640 x 480, 800 x 600 or 1024 x 768.
2. Please establish the connection and switch to „VGA" input.
3. For displaying the best results, please uses the native resolution of the TV LCD panel:
HTL 2335 HD —> 1920 x 1080 Pixel

USB Port

The USB port has different functions:
1. PVR function
2. Time Shift Function
3. Playback of recorded TV programs
4. Playback of Video, Audio and Picture content from USB storage
5. Install new firmware version
Digital Coaxial Sound output
The specifications of DVB broadcast allows to transmit Stereo and/or Dolby Digital sound.
To output the Dolby Digital sound you can connect the TV set with a digital amplifier and
listen the sound by a connected speaker set.

Headphone

You can connect the a headphone on the TV set. Please insert the 3.5 phone jack
into the headphone connector.
20
Connection
HTL 2335HD