Xoro HTL 2335HD Mode D'emploi page 81

WARNING
•
All data on the connected device will be lost if you confirm to format.
•
It is strongly recommended that the USB device is dedicated only for this unit. Various
external data contain in the USB device might cause DVR file system corrupt and requires
formatting.
• Once USB device is formatted, unit will create a unique file system on it. Therefore, it is not
advisable to connect USB device to a computer to export data.
NOTES:
•
We cannot guarantee compatibility (operation and/or bus power) with all USB mass storage
devices and assumes no responsibility for any loss of data that may occur when connected to
this unit.
•
With large amounts of data, it may take longer for the system to read the contents of a USB
device. Unit may require longer time to format depending on the volume of the USB device.
•
Some USB devices may not be properly recognized.
•
Even when they are in a supported format, some files may not play or display depending on
the content.
•
Please make sure the USB device's file system is FAT32.
•
USB device must be a high speed USB2.0 in order to operate properly.
Time Shift Size
After the disk format is finished, the menu as shown
on the right will appear.
The item Time Shift Size is highlighted, press the ◄►
button to choose a size to be allocate for time shift.
The maximum value is 8 GB.
Press the ▼ button to highlight OK and press the OK
button to confirm and return.
Speed
Once USB device is checked, this item will display the USB data transfer rate and the remaining
space in it.
Recorder
HTL 2335HD
29