Xoro HTL 2335HD Mode D'emploi page 71

Component Y Pb Pr Video– and Stereo Audio input
If you uses more than one multimedia terminals and the SCART, HDMI and S-Video connection are
used, than you connect the next device by the audio/video component input (Y Pb Pr). Please
connect the wire of an 3-pin component cable with the YPbPr input of the TV set and the multimedia
device. Please pay attention to the coloured coding of the cable, inputs jacks (LCD set) and the video
output jacks (INPUT):
•
"Y" with the green wire or RCA plug
•
"Pb" with the blue wire or RCA plug
•
"Pr" with the red wire or RCA plug
With this kind of connection only video signals are transmitted. For listening sound on the TV you
should establish also a sound connection. Please connect the white and red wire of the 2-pin
component cable with the AUDIO OUT (INPUT) and with the "L-In" and "R-in" plug of the TV set.
Please press the INPUT button and choose „YPBPR" in the popup window. The YUV input is active.
Note:
The Audio-adapter cable (RCA to stereo jack) is not part of the accessories.
Video- und Stereo Audio input
If you uses more than one multimedia terminals and the SCART,
HDMI and AV connection are used, than you connect the next
device by the Video. Please connect the Video cable with the VIDEO
input of the TV set and with the Video output of the multimedia
device. With this kind of connection only video signals are
transmitted. For listening sound on the TV you should establish also
a sound connection.
Please connect the white and red wire of the 2-pin component cable with the AUDIO OUT (INPUT)
and with the "L-in! and "R-in" plug of the TV set.
Please press the INPUT button and choose „AV" in the popup window. The video input is active.
Note:
The Audio-adapter cable (RCA to stereo jack) is not part of the accessories.
Connection
HTL 2335HD
19