Channel Setting - Xoro HTL 2335HD Mode D'emploi

Channel setting

The channel settings includes the options for Auto Search (Auto Tuning), DTV manual Search, ATV
manual Search and Programme Edit.
Auto search (Auto Tuning)
With this setting you can search the TV
broadcast station for analogue and digital TV
programs.
1. Press the ▼ button and navigate to the
option „Auto Tuning". The search starts
when you press the ► button.
2. A new popup window appears on the
screen. There you can see the option
country selection. Please choose the
suitable country by pressing the ◄ or ►
buttons.
3. If you had chosen the country, please
select the tune type. The options are
ATV+DTV, DTV and so on. If you can
receive only DTV, please choose DTV.
The search runs is faster.
4. After chosen the two options please
press the ▼ button, so that the „Start"
field will be marked with blue and is
active. Press the OK button and the
search starts immediately.
5. A new window opens on the screen,
where the status of the searching is
documented. The values of the found
TV broadcast stations of analogue,
digital and Radio are listed.
6. After finishing of the searching, all found TV broadcast station will be saved into the channel
list. You can load at the TV channel list by pressing the CH/LIST button.
Note:
The complete searching needs a couple of minutes.
DTV Manual Search (DTV Manual Tuning)
Press the ▼ button and navigate to the option "DTV manual
Tuning". The search starts when you press the ► button.
1. You can change the channel by using ◄ or ► buttons.
So you can define, on which channel shall be runs the
search.
2. Starts the searching by the OK button.
To leave the DTV manual tuning, press the EXIT or MENU
button.
38
LCD Settings
HTL 2335HD