Xoro HTL 2335HD Mode D'emploi page 82

Recording program
After you setup the settings on the DVR File System menu, you can record a DTV program on the
external USB device. Select the desired program then press the RECORD button on the remote
control to start recording and the progress bar will be displayed.
During recording, the progress bar will fade out in 10 seconds.
Press the RECORD button again, an icon will blink on the bottom right corner of the screen and it will
fade out in 10 seconds. Recording stops when you press the STOP button and the recorded file is
stored n the external USB device automatically.
Schedule Recording by EPG
Schedule record is a function which allows you to record
future program. You can first set up a schedule record, then
unit will record the program when the program is broadcast.
It will stop recording when the program finish.
1. Press the EPG button to display Electronic Program
Guide menu.
2. Select your desired TV program and press the REC
button to enter the Recorder menu, as shown:
3. From here you can modify the start and end date
time of your record schedule by using the ◄►
direction button once.
4. Use the ▲▼ direction button to select date/time to
change.
5. Use the ▲▼ button to select desired item and press
the OK button to enter.
Program
Start Date
Start Time
End Date
End Time
Mode
30
Select a program.
Set a date to start recording in the future.
The start date should be later than the current date.
Set a time to start recording in the future.
The start time should be later than the current time.
Set a time to end recording in the future.
The end date should be later than the start date.
Set a time to end recording in the future.
The end time should be later than the start time.
Only one program can be recorded in the same period of time.
Choose either Once, Daily, Weekly.
Recorder
HTL 2335HD