Xoro HTL 2335HD Mode D'emploi page 95

Picture setting
Colour Temperature
With the ◄ or ► buttons you can select the level of
colour temperature. The three preset options are:
•
Cool
•
Warm
•
Medium
You can define you own settings if you uses the
USER options. Than you can get access to the
three colours "Red", "Green" and "Blue". Select the
level of each colour by using the ◄ or ► buttons.
Aspect Ratio
With the ◄ or ► buttons you can select the aspect
ratio and changes the view on the screen. The options are:
•
16:9 - The picture is every time in full screen mode, independent from the supported aspect
ratio.
•
4:3 - The picture view is 4:3 and shows on the left and right side a black bar, independent
from the supported aspect ratio.
•
Auto - The view is defined by the supported aspect ratio and the adjustment is automatically.
By 16:9 is the picture in full screen and by 4:3 show the screen the black bars on the right
and left side.
•
Zoom 1 - This option can be used for an 4:3 aspect ratio. The picture is zoomed into full
screen by keeping the aspect ratio. Parts of the picture will be cut-off (specially on the top or
bottom side) and can not seen anymore.
•
Zoom 2 - This option can be used for an 16:9 widescreen or cinemascope picture. The
picture is zoomed into full screen by keeping the aspect ratio. Parts of the picture will be cut-
off (specially on the right and left side) and can not seen anymore.
By every INPUT except the internal DVD-Player you can change the aspect ratio by pressing the
SCREEN button on the remote control.
Note:
Do not uses the 4:3 aspect ratio every time, because you can damage the TFT LCD screen.
Noise Reduction
With the ◄ or ► buttons you can activate or deactivate the noise reduction. The option ON starts the
noise reduction and OFF deactivate them.
LCD Settings
HTL 2335HD
43