Mounting The Stand - Xoro HTL 2335HD Mode D'emploi

1. Interrupt power to the TV
2. The television set on a stable surface (preferably with a piece of cloth to avoid scratches)
3. The stand in the correct position on the leg retainer and carefully insert (Fig. 1).
4. Stand careful to Left (counterclockwise) until the lock (Figure 2).
5. You can now use the two screws in the appropriate position (D in Figure 3) attached with a
Phillips screwdriver.
6. Set up at the TV again and lift them slightly. If the wrong foot drops or sitting on the stand
operator, repeat the process again.

Mounting the Stand

HTL 2335HD
11