FISCHER 10444 Mode D'emploi page 12

5. Environmental Instructions and Disposal Measures
It is required that you observe the following notices on the environmentally-friendly disposal of
packaging materials and the product.
Dispose of packaging materials
NOTE:
Dispose of packaging materials in environmentally-friendly fashion (paper and boxes
with paper garbage, plastic with plastic garbage, metal packaging material with metal
garbage).
Final disposal of the product
wARNING:
Dispose of the coupling bike carrier in environmentally-friendly fashion: metal parts
(screws, nuts, frame parts, profile rails, etc.) belong with metal garbage. Plastic parts
(end pieces for profile rails, rim strips, etc.) belong with plastic garbage.
6. Replacement parts, warranty, service, manufacturer
The warranty period is 2 years and begins on the day of purchase or the day of transfer of the
goods. To make warranty claims valid, the warranty card must be filled out in every case. Please
therefore keep the receipt and the warranty card! The manufacturer has the right to demand the
receipt as proof.
The manufacturer denies all responsibility for possible injuries or damages to objects which are
caused by improper installation or use of the product. The manufacturer guarantees the cost-free
removal of defects which can be attributed to material or manufacturing errors through repair,
redelivery, or exchange at its own choice.
The warranty does not extend to damages which were caused by an accident, an unforeseen
occurrence (e.g. lightning, water, fire, etc.), improper use or transport, failure to heed safety and
maintenance provisions, or through other improper handling or change. The legal warranty obli-
gation of the vendor is not limited by the warranty. If parts should be missing or defective at the
time of purchase, please note this in the following lists and send these to us. We will send you
the missing parts at the address you indicate.
7. Assembly Instructions see page 38
12
10444_Betriebsanleitung.indd 12 21.02.19 17:19