Makita CL121D Manuel D'instruction page 10

OPERATION
CAUTION:
Always hold the handle when carrying
the cleaner. If you hold the attachment part to carry, it may
come off from the cleaner and result in personal injury.
CAUTION:
Do not grasp the hose joint as shown in
the figure. Holding the hose joint may get your finger pinched.
1
► 1. Hose joint
Using as a vacuum cleaner
NOTE: Remove the blower attachment before vac-
uum cleaning. If the blower attachment is attached to
the cleaner, the suction power will be reduced.
Installing or removing the cleaner
attachment
To connect an attachment such as a nozzle, twist and insert it
securely to the hose. To disconnect, twist and remove it.
The way of installation varies depending on the nozzles as illustrated.
2
3
4
5
► 1. Hose 2. Rubber nozzle 3. Soft brush 4. Seat
nozzle 5. Mat nozzle
1
Vacuum cleaning
Rubber nozzle
This nozzle is convenient for cleaning bottom corners
such as a door pocket. The rubber nozzle is gentle to
the cleaning surface.
► 1. Rubber nozzle
Soft brush
This nozzle is convenient for cleaning the air condi-
tioner vents, dashboard, etc. The head of the soft brush
can be turned to right angle.
► 1. Soft brush
10 ENGLISH
1
1