Changing The Touchscreen Display Themes; Adjusting The Screensaver Delay; Adjusting The Screen Contrast - SciCan STATIM 2000 G4 Manuel De L'utilisateur

Cassette autoclave
Masquer les pouces Voir aussi pour STATIM 2000 G4:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 Setting up your STATIM

3.13 Changing the Touchscreen Display Themes

Your STATIM G4 touchscreen themes (i.e. the colours of the icons and background) can be changed to
one of the preset options or you can upload additional themes, as they become available from SciCan,
using the USB port. To change themes follow these steps:
1.
2. Scroll to
Theme
3. From here, you can either select
Upgrade Theme
4. In the
Change Theme
each theme will display on the touchscreen. Press
menu.
5. To upgrade a theme available from SciCan, download the theme onto your computer's desktop and
save the files onto a portable USB storage device. Insert the device into your STATIM's USB port and,
from the UPGRADE THEME screen, press
5.1. The unit will load the files directly from the USB storage device. Do not remove the USB storage
device while files are loading (this could take as long as 10 minutes). When it is complete, the
screen will display the 'Done' message. This new theme will now be accessible from your THEMES
menu.
5.2. Press
to select this theme and return to the Setup screen.

3.14 Adjusting the Screensaver Delay

To change the length of time before your inactive touchscreen activates the screensaver,
follow these steps:
1.
Screensaver
2. Scroll to
3. Use
to scroll through you time options. When you have found the amount of time you require,
press it. Press

3.15 Adjusting the Screen Contrast

The STATIM G4 touchscreens are calibrated for the lighting condition of most sterilization centres. Should
you need to adjust the contrast for your office, follow these steps:
1.
LCD Contrast
2. Scroll to
3. Use
to scroll through your contrast options. When you have found the contrast you require,
press it. Press
and select.
Change Theme
to access a new theme that can be loaded using the USB port.
screen,
and select.
to save and return to the Setup menu.
and select.
to save and return to the Setup menu.
for a menu of preloaded themes or
use to scroll through your available options. As you scroll,
to select your theme and return to the Setup
.
Upgrade
16

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Statim 5000 g4

Table des Matières