Safety Notes; Applications; Conformity And Approval - IMG STAGELINE TXS-855 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2 Safety Notes

The units (receiver and power supply unit) corre-
spond to all relevant directives of the EU and are
therefore marked with
WARNING The power supply unit uses danger-
ous mains voltage . Leave servicing
to skilled personnel only . Inexpert
handling of the unit may result in
electric shock .
The units are suitable for indoor use only . Protect
them against dripping water and splash water,
high air humidity and heat (admissible ambient
temperature range: 0 – 40 °C) .
Do not operate the receiver and immediately dis-
connect the power supply unit from the socket
1 . if the units are visibly damaged,
2 . if a defect might have occurred after a unit
was dropped or suffered a similar accident,
3 . if malfunctions occur .
In any case the units must be repaired by skilled
personnel .
For cleaning only use a dry, soft cloth; never use
water or chemicals .
No guarantee claims for the units and no liability
for any resulting personal damage or material
damage will be accepted if the units are used for
other purposes than originally intended, if they
are not correctly connected or operated, or if
they are not repaired in an expert way .
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which is not harmful
to the environment .

3 Applications

Combined with a transmitter of the TXS-865 series
from IMG STAGELINE, the multifrequency receiver
TXS-855 creates a wireless audio transmission sys-
tem ideally suited for professional stage applica-
tions . The receiver uses the diversity technology:
The signal transmitted is received by two antennas
placed at a distance from each other and then
checked for its quality . The signal with the highest
signal quality will be used .
The transmission system operates in the UHF
range 506 – 542 MHz . Six channel groups with pre-
set channels in different numbers (22 max .) are avail-
able . Frequency matching is very easy: Via a radio
signal, the receiver will set the transmitter to the
same transmission frequency (REMOSET function) .
10
.

3.1 Conformity and approval

Herewith, MONACOR INTERNATIONAL declare that
the receiver TXS-855 complies with the directive
2014 / 53 / EU . The EU declaration of conformity is
available on the Internet:
www .imagestageline .com
The receiver may be operated in the following
countries:
DE
The corresponding transmitter requires registra-
tion; please refer to the instruction manual of the
transmitter!
4 Connection
1) Insert the two antennas (1) provided into the
antenna jacks ANT . 1 and ANT . 2 (15) . Place the
antennas in a vertical position .
Hint: The pair of antenna signal amplifiers TXS-875B
(available as an accessory) can be used to increase the
transmission range and the interference resistance . The
amplifiers are supplied with power via the antenna
jacks of the receiver .
2) For connection to a microphone input or highly
sensitive line input of the subsequent unit (e . g .
mixer, amplifier), use one the two balanced
audio outputs:
– XLR output (11); if required, attenuate the
signal level of this output by 20 dB with the
toggle switch ATTENUATION (10)
– 6 .3 mm output jack (9); for connection to an
unbalanced input, use the cable provided
3) Connect the power supply unit provided to the
power supply jack (14) and to a mains socket
(230 V/ 50 Hz) . To prevent accidental disconnec-
tion of the low voltage plug, lead the cable of
the power supply unit around the hook (13)
for strain relief .

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

25.5280

Table des Matières