Canada EMC
This spark ignition system complies with the Canadian
standard ICES-002.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
•
Incorrect or careless use of the product can turn it
into a dangerous tool that can cause serious or even
fatal injury. It is extremely important that you read
and understand the contents of this operator's
manual.
•
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
•
Overexposure to vibration can lead to circulatory
damage or nerve damage in people who have
impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration.
Such symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes in
skin color or condition. These symptoms normally
appear in the fingers, hands or wrists. The risk
increases at low temperatures.
4
Used if there is a risk of
Used if there is a risk of
Read the warning
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
•
If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop. Avoid all
usage which you consider to be beyond your
capability.
•
Keep in mind that the operator is responsible for
accidents or hazards occurring to other people or
their property.
•
Never allow anyone else to use the product without
first ensuring that they have understood the contents
of the operator's manual.
•
Never allow children to use or be in the vicinity of the
product. As the product is equipped with a spring-
loaded stop switch and can be started by low speed
and force on the starter handle, even small children
under some circumstances can produce the force
necessary to start the product. This can mean a risk
of serious personal injury. Therefore remove the
spark plug cap when the product is not under close
supervision.
•
Store the product out of reach of children.
•
Never use the product if you are tired, if you have
drunk alcohol, or if you are taking medication that
could affect your vision, your judgement or your
coordination.
•
Never use a product that is faulty. Carry out the
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. Refer to instructions under the
heading Maintenance.
•
Never use a product that has been modified in any
way from its original specification.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
•
Never use the product in extreme weather conditions
such as severe cold, very hot and/or humid climates.
•
Faulty blades can increase the risk of accidents.
•
Ensure that no people or animals comes closer than
15 m / 50 ft while you work.
•
Observe your surroundings and make sure that there
is no risk of people or animals coming into contact
with the cutting equipment.
Read the warning
1695 - 001 - 24.06.2021