Thanks For Choosing Toto; Before Installation - Toto Dartmouth LT641 Manuel D'installation

Thanks for Choosing TOTO

Before Installation .................................................................................................3

Included Parts .......................................................................................................4
Warnings ................................................................................................................4
Installation Procedure ....................................................................................... 4-5
Warranty.................................................................................................................6
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
If you are installing this product in a new construction or remodel, please
make sure you are following all local plumbing and building codes. Carefully
unpack and examine your new fixture for damage. To help insure that the
installation process will proceed smoothly and correctly, please read these
instructions carefully before you begin.
„ If necessary, turn off the water supply and remove the old lavatory. In-
spect the drain and supply pipes and replace them as necessary.
„ Use the template provided with the lavatory. For replacement installation,
make sure that the existing cutout is the same size or smaller than what is
required for the new lavatory.
„ Your undercounter lavatory should be installed by an experienced profes-
sional. Failure to follow these instructions may result in product/property
damage and/or personal injury.
„ Install the lavatory such that future removal of the fixture from under-
neath the counter is possible.
NOTE: The lavatory faucet and drains are not included.
NO TE: The fixture dimension and hydraulic performance meet or exceed all
standards and requirements of CAN/CSA B45 and ANSI/ASME A112.19.2
for vitreous china and A112.19.1 for cast iron.
TABLE OF CONTENTS
! ..............................................................................3
®
THANKS FOR CHOOSING TOTO!
BEFORE INSTALLATION
3