Connectivity; Wired Connectivity; Wireless Connectivity; Wake On - Finlux FL5032 UHD Manuel D'utilisateur

Connectivity

Wired Connectivity

To Connect to a Wired Network
You must have a modem/router connected to an
(back) of your TV.
1. Broadband ISP connection
2. LAN (Ethernet) cable
3. LAN input on the rear side of the TV
To conf gure w red sett ngs refer to the Network
sect on n the Settings menu.
a case, use an Ethernet cable to connect your TV
1. Network wall socket
2. LAN input on the rear side of the TV
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired Device,
Wireless Device or Disabled, in accordance with the
active connection to the TV set. Select this as Wired
Device if you are connecting via an Ethernet cable.
Internet Speed Test
Highlight Internet Speed Test and press the OK
button. TV will check the internet connection bandwidth
and display the result when complete.
Advanced Settings
Highlight Advanced Settings and press the OK
button. On the next screen you can change the IP and
DNS settings of the TV. Highlight the desired one and
press Left or Right button to change the setting from
Automatic to Manual. Now you can enter the Manual
IP and / or Manual DNS values. Select the related item
in the drop down menu and enter the new values using
the numeric buttons of the remote. Highlight Save and
press the OK button to save settings when complete.
Wireless Connectivity (optional)
To Connect to a Wireless Network
IMPORTANT: A wireless LAN adaptor (WLAN USB
dongle) is required to use wireless network features.
The wireless adaptor is not supplied with the unit, it
can be purchased separately. For more information
contact your local dealer or retail outlet where you
bought your TV.
The TV cannot connect to the networks with a hidden
SSID. To make your modem's SSID visible, you should
change your SSID settings via the modem's software.
1. Broadband ISP connection
2. WLAN USB dongle (not supplied)
3. USB inputs on the rear side of the TV
A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimized for smoother
and faster HD video streaming, file transfers and
wireless gaming.
the area.
English - 27 -
to the TV's USB port. USB hubs are not supported.
The WLAN USB dongle supports 802.11 a,b,g &
You must change your modem's SSID when there
Configuring Wireless Device Settings
USB dongle to one of the USB ports on the TV. Open
the Network menu and select Network Type as
W reless Dev ce
Scan W reless Networks
OK
OK to connect.
Note: If the modem supports N mode, you should set N
mode settings.
OK button on the remote control.
Network Type
as D sabled.
If your router has WPS, you can directly connect to the
modem/router without entering a password or adding
the network first. Highlight Press WPS on your wifi
router option and press OK. Go to your modem/router
device and press the WPS button on it to make the
connection. You will see a connection confirmation on
your TV once the devices have paired. Select OK to
proceed. No further configuration is required.
Internet Speed Test and press the OK button
Advanced Sett ngs and press the OK button to
Save and press the
OK
Other Informat on
Connected or Not Connected and the current IP
Connect ng to your mob le dev ce v a WLAN
your TV.
feature of your TV.
AVS Sources menu and
press OK
and press the OK
If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.
Wake ON (optional)
Wake-on-LAN (WoL) and Wake-on-Wireless LAN
(WoWLAN) are standards that allow a device to be
turned on or woken up by a network message. The
message is sent to the device by a program executed
on a remote device connected to the same local area
network, such as a smartphone.
Your TV is WoL and WoWLAN compatible. This feature
might be disabled during the First Time Installation
process. To enable this feature set the Wake On option
in the Network menu as On. It is necessary that both
the device, from which the network message will be
sent to the TV, and the TV are connected to the same
network. Wake On feature is only supported for Android
OS devices and can only be used via YouTube and
Netflix applications.
In order to use this feature the TV and the remote
device should be connected at least once while the
TV is on. If the TV is powered off, the connection
should be re-established, the next time it is switched
English - 28 -