Maxspect R420R 160w Mode D'emploi page 16

Automatic mode – Programming the Photo-Period
English
1. Once you are in the program setting mode, Time Point 1 is selected by default.
Rotate the control dial to select the Time Point you want to modify.
A TP:
S A:
2. Press the control dial to change the time setting for this Time Point. Rotate the
control dial to set the time for the selected Time Point.
A TP: 2
S A:
3. Press the control dial to change to Channel A. Rotate the dial to change the
brightness.
A TP: 2
S A: 100%
4. Press the control dial to change to Channel B. Rotate the dial to change the
brightness.
5. When finished, press and hold the control dial for 2 seconds to exit setup.
15
1
100% B:
100% B:
B:
Operating Instructions
8:00
100%
9:00
100%
10:00
100%