Maxspect R420R 160w Mode D'emploi page 11

Manual Mode "M"
Under Manual mode, user can adjust the brightness of the two channels by using the control
dial.
1. Press the control dial once to enter setup. Channel A will be selected by default.
Rotate the dial to adjust its brightness.
M A: 100%
2. Press the control dial again to switch to Channel B. Rotate the dial to adjust its
brightness.
M A: 60%
3. Press the control dial again to switch to ON/OFF toggle. Rotate the control dial to
turn the fixture ON or OFF.
M A: 60%
4. Press the control dial one more time to exit.
B: 100%
LED: ON
B: 100%
LED: ON
B: 85%
LED: ON
Operating Instructions
English
10