Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROL PANEL "MC180"
1
Built-in fixing
LEGEND
1)
Blue service battery "1" operation status LED.
2)
Blue service battery "2" operation status LED.
3)
Yellow "manual" mode LED.
OPERATION
Press and hold (for 3 seconds) the button, ref. 4, to switch
the operating mode of the BDS180 from "automatic" to
"manual" and vice versa.
If the yellow LED, ref.3, is on, it means that the "manual"
mode has been activated.
3
2
4
figure 3
Wall
fixing
4)
Select button.
5)
BDS180 connector (the MC180 is supplied with a
6m cable)
When the device is set to "manual" mode, press briefly
the button, ref. 4, to switch the selection between battery
"1" and battery "2".
5
with "BMAD" spacer
[optional]
EN
21
Publicité
Table des Matières
