Simplified Eu Declaration Of Conformity; Legal Notices - Indexa DVT50 SET Mode D'emploi

#
ABS angle bracket for 45° corner fitting of the door intercom
(fitting on the left or right), art. no. 27083
#
Spare battery DVT50M AKKU, art. no. 27084
#
Door opener ET100, art. no. 37019
#
Switching power supply
32107
#
Flush-mount power supply
Art. Nr. 32163
20. Disposal
Do not dispose of packaging material, used batteries or
products as household waste. Please use your recycling
system. Details are available from your local authority.
21. Simplified EU declaration of
conformity
Hereby, INDEXA GmbH declares that the radio equipment type DVT50
Set is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.indexa.de/w2/f_CE.htm.
23. Trouble shooting
Problem
Empty screen
Unstable image
Image too brightness
A whistling sound can be heard
No sound
Dark monitor image during twilight /
darkness
The monitor image displays a bright back-
ground, however the visitor is displayed
dark
Tamper alarm has been triggered
The batteries in the door intercom go flat very
quickly
The camera image cannot be switched on
manually
NG1000, 12 V DC, 1000 mA, Art. Nr.
ORBIT-12/2000V, 12 V DC, 2A,
Cause
Mobile unit has no power
The devices are not paired with each other
Outdoor station is too far apart
Wireless connection is blocked
Interference with wireless signal
Strong light source in camera view
Overexposure due to strong light source
It is produced by acoustic feedbackg
The volume on the mobile unit / door intercom is too
low or is switched off
The outdoor station requires additional lighting to be
able to display a good image
There is too much backlighting in the background
Door intercom with power supply has been removed
from the protective cover
Door intercom (operated with batteries) is in energy
consumption mode
Door intercom (operated with batteries) is in energy-

22. Legal Notices

This product or software may contain or make use of code under the
GNU General Public License v2 e.g. the linux kernel, the GNU Lesser
General Public License v2.1 or the Apache licence v2.0.
For further information regarding license terms and – where required
by license – source codes please send an email to
copyrequest@indexa.de to get them free of charge. Some licenses,
however, require the provision of physical copies of the source code. In
this case, you may obtain a copy of the source codes by contacting us
as well via copyrequest@indexa.de. A nominal fee (i.e., the cost of
physically performing the source distribution) will be charged for this
service.
Note: your copy of this product may not contain code covered by one or
more of the licenses listed here, depending on the exact product and
version you choose.
The corresponding license texts can be found at the end of the manual.
v1.0
Remedy
Check the mains adapter, cable connections and batteries
Remove the protective foil from the battery of the mobile unit
See chapter 13.2
Reduce the distance between the devices
Remove large objects or change the location of the stations
Remove sources of interference from the devices, note the
information about "wireless range" in section 7 here
Relocate the outdoor station
Relocate the outdoor station
Place the stations further apart
Reduce the volume on the indoor station
Adjust the volume / ring duration for the mobile unit / door
intercom as necessary on the menu of the mobile unit
Install additional lighting
Install additional lighting or change the location of the outdoor
station
To switch off the tamper alarm, press the on/off button
[8]or the talk button
Switch the door intercom to energy-saving mode (see note
under section 11.2)
Switch the door intercom to energy consumption mode (see note
under secrion 11.2, Note: the batteries will go flat very quickly)
Indexa GmbH
Paul-Böhringer-Str. 3
74229 Oedheim
Germany
www.indexa.de
Subject to change
[1] on the mobile unit.
GB - 37