Features And Equipment; Technical Data - Indexa DVT50 SET Mode D'emploi

4. Features and Equipment

Mobile unit DVT50M (see Fig. A)
1 Talk button
2 Buttons / / /
—
3 Button left
4 Mobile unit
5 Door release button
charged)
6 Screen
Displays on the start screen:
Battery display for mobile unit
14:37 Current time
The door intercom rang but the conversation was
not accepted and a snapshot was saved (symbol
flashes red - disappears as soon as menu item
"Show images" is opened)
Battery in mobile unit almost empty
Displays on the camera image screen:
1# Intercom 1 or 2 is specified
Current intercom is being powered via the power
supply unit
Current intercom is being powered by batteries
Indication that the conversation has been
accepted and intercom mode is active
Connection indicator
Snapshot has been saved
14:37 Current time
—
7 Button right
8 On/Off button
9 Microphone
10 Speaker
11 Battery compartment cover
12 Charging contact
Charging station DVT50L (see Fig. A)
13 Connection for power supply unit
14 Charging station
15 Power LED
16 Contact for mobile unit
Outdoor station DVT50T (see Fig. A)
18 Speaker
19 Name plate
20 Outdoor station
21 Microphone
22 White LEDs
23 Lens
24 Light for ring button (flashes on pressing the ring button and
throughout any conversation)
25 Doorbell button
28 - GB
(lights blue when the battery is
26 Connections
Taster für TÖ/GND Connection for an optional external
DC 9-12V / GND
NO/COM
27 Pairing button
28 Hole for screw
29 Lugs for locking into the protective cover
30 Battery compartment cover
31 Wires for controlling an optional external signal generator
(DVT50T2: reacts to pressing the upper doorbell button)
Accessories (see Fig. A)
17 Mains adapter for charging station
32 Protective cover
33 Hole for security screw
34 Magnet for tamper alarm
35 Opening for connecting wires
36 Fixing hole
37 Screw
38 Screw
39 Plug
40 Cover for connection compartment
41 Screwdriver
42 Security screws
Example of connection (see Fig. B) for:
#
Optional button to open the door
#
Optional door release with separate power supply
#
Power supply unit connection
#
Optional signal generator with separate power supply

5. Technical data

Outdoor station DVT50T
Operating voltage 9 - 12 V
mA)
or
Current consumption max. 200 mA (12 V
max. 500 mA (2x LR14 (C), 1,5 V)
Door release relay potential-free changeover contact,
switching capacity max. 1 A with up to 15
V AC/DC (switching duration can be
adjusted between 1 and 9 seconds)
Relay for
signal generator control potential-free changeover contact,
switching capacity max. 1 A with up to
15 V AC/DC (switching duration approx.
3 seconds)
button to release the door
Power connection
Terminals for controlling an optional
door release
"
DC (stabilised, min. 300
2x LR14 (C), 1,5 V alcaline batteries
"
DC)