Warranty Conditions - SOLAC PV1610 Mode D'emploi

DRY IRONING
1 If the tank contains water, set the steam selector (8) to the closed position
2 Connect the iron to the power supply and set the temperature selector (7) to the desired
position.
,
The pilot light (9) will turn off when it reaches that temperature.
CLEANING AND CONSERVATION
)
Clean the appliance before using it for the first time, after each use and if it has not been
used for a long period.
SOLEPLATE
1 Unplug and allow the soleplate to cool.
,
To clean the soleplate use organic clay-based products.
OUTER PART
1 To clean the outer part of your iron, use a damp soapy cloth.
,
Do not clean with harsh chemicals or solvents as they may attack plastic parts and / or
eliminate some of the settings and / or indications.
2 Keep your iron in a vertical position, wrap the cable around the heel base and secure
the cable with the clip.
)
Although the power cord has a 360º swivel component, NEVER FORCE the cord
when starting to wrap it around the product.

WARRANTY CONDITIONS

• Solac accepts no liability for faults in your appliance in the event of noncompliance with
the specifications of the warranty conditions or failure to follow the operating or
maintenance directions included in the instruction brochure for every appliance.
• The warranty conditions may be found in the accompanying "World-Wide Guarantee"
booklet.
)
We remind you that the damage caused by the effects of scale is not covered by
the guarantee.
CLEANING AND CONSERVATION
, (fig. 2).
en
15