Switching Off The System; Stopping The Machine In An Emergency; Operation If Defects Are Present - Hoffmann Garant Tool24 PickOne Manuel D'utilisation

7.3

Switching off the system

1. Shut down the software in the proper manner.
DE
2. Shut down Windows.
3. Disconnect the power supply.
7.4

Stopping the machine in an emergency

EN
In hazardous situations, the movements of compo­nents must be stopped
as quickly as possible and the power supply must be turned off.
Stopping the machine in an emergency
Proceed as follows in an emergency:
1. Stop the machine by interrupting the power supply.
7.5

Operation if defects are present

Impairments can occur during the removal of items from the goods issue
system or the filling of the goods issue system in the case of a power
FR
outage or if devic­es are defective.
Operation in the case of a defective device
Proceed as follows in such cases:
Disconnect the power supply.
Remove the connection cable on the Tool24 PickOne.
Open the emergency access door.
The Tool24 PickOne system can be opened by the person responsible for
the system and the carousel can be moved by hand. In this case, the r
IT
emoval of items is not recorded automatically.
ES
114
NOTICE!
Risk of damage to property when the power supply is discon-nected.
If you switch off the goods issue system without first shutting down the
computer unit in the proper manner, the system can be damaged.
„
Shut down the system properly before disconnecting the
power supply.