Problem
The product does not oper-
ate correctly in a moist en-
vironment.
Storage
•
Clean the product before storage.
•
Keep the product in a dry and frost-free area.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Disposal of the product
•
Obey the local recycling requirements and applicable
regulations.
•
When the product no longer is used, send it to the
dealer or discard it at a recycling location.
1579 - 001 - 18.12.2020
Cause
Moist is mixed with the oil
in the product.
The lamella absorbs water
and causes a blockage in
the rotor.
Storage and disposal
Solution
Disassemble and clean all the parts with fuel. Refer to
disassemble the product on page 6 . Then lubricate all
parts and assemble the product. Refer to
the product on page 6 .
Drain the water from the air compressor tank.
Disassemble and clean all the parts with fuel. Then lubri-
cate all parts and replace the lamella. Keep the lamella
in oil until assembly. Refer to
on page 6 .
To assemble
To assemble the product
To
9