Before The First Use - FUAVE TV3010 Mode D'emploi

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Unscrew the screws out of the bottom of the fan.
• Fasten both bottom plates to each other, make sure the power cable is
put through the hole in the middle.
• Screw the bottom plate onto the bottom of the fan.
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V 50Hz).
Assembly instructions
• Remove the 3 screws out of the turnplate.
• Put the front base onto the rear base and join them together.
• Pull the power cord through the hole of the base.
• Align the base with the turnplate and use the 3 screws to secure
them together.
• Press the power cord into the cable slot.
1 0