Clarke FOCUS 00310S Manuel D'utilisation
  1. Manuels
  2. Marques
  3. Clarke Manuels
  4. Machines à plancher
  5. FOCUS 00310S
  6. Manuel d'utilisation
Clarke FOCUS 00310S Manuel D'utilisation

Clarke FOCUS 00310S Manuel D'utilisation

Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
Operator's Manual / Manuel d'utilisation / Libro de Instrucciones
Models: 00310S, 00310C, 00311S, 00311C, 00312S, 00312C,
U.S. Patent No. 6,105,192; No. RE39,581; No. 6,557,207; No. 7,185,397 and Patents Pending
Canada Patent No. 2,353,279 (Deluxe Machines)
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
This book has important information for the use and safe operation of this machine. Failure to read this
book prior to operating or attempting any service or maintenance procedure to your Clarke machine
could result in injury to you or to other personnel; damage to the machine or to other property could
occur as well. You must have training in the operation of this machine before using it. If your operator(s)
cannot read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator's position at the rear of the machine.
Form No. 71171A
3/08 revised 12/09
Rider Scrubber
Rotary, Cylindrical and
(Manual Steering)
00317S, 00317C
English (2 - 29)
EN
Español (30 - 57)
ES
Français (58 - 85)
FR
Clarke
®
Printed in the U.S.A.

Publicité

Table des Matières
loading

Manuels Connexes pour Clarke FOCUS 00310S

Sommaire des Matières pour Clarke FOCUS 00310S

  • Page 1 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.

  • Page 2: Table Des Matières

    Solution Tank Assembly Drawing (View 2) ......104 Electrical Panel Assembly Drawing and Parts List ....122 Parts List (View 2) ..........105 Electrical Connection Diagram ...........124 Electrical Schematic ............128 Page -2- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 3: Operator Safety Instructions

    Failure to read the Operator’s Manual prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well. You must have training in the operation of this machine before using it. If your operator(s) cannot read English, have this manual explained fully before attempting to operate this machine.
  • Page 4 Use of this machine to move other objects or to climb on could result in injury or damage. Do not use this machine as a step or furniture. CAUTION: Your machine warranty will be voided if anything other than genuine Clarke parts are used on your machine. Always use Clarke parts for replacement. CAUTION: This machine contains lead acid batteries.

  • Page 5: Introduction & Machine Specifi Cations

    Products in such environments. The Manufacturer disclaims any responsibility to advise purchasers of any specifi c requirements that may be applicable to the use of the Products in such environments. Clarke ® Operator’s Manual (EN) - Focus Rider Form No.

  • Page 6: Symbols Used On Focus

    • Do not use fl ammable materials. One Touch RISK OF INJURY OR DAMAGE TO Button MACHINE • Do not turn, stop or leave machine 71018A on a ramp or dock. Page -6- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 7: Display Screens For Focus

    SCREEN 3 (Diagnostic) The Diagnostic only. It will not show unless a fault with the machine occurs. When the fault happens the icon and error code will be displayed. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A...

  • Page 8: Machine Control Panel

    The circuit breaker reset buttons are located on the back side of the front cover below front display. The breakers are as follows: Item A - Main (5 amp) Item B - Key Switch (5 amp) Page -8- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 9: Machine Controls And Features

    NOTE: Machine will not function when manual brake release is engaged. See fi gure 2. Reverse Alarm The reverse alarm will sound intermittently and automatically when the machine is in reverse. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 9 -...

  • Page 10: How To Prepare The Machine For Operation

    Rotate the recovery tank and then carefully rotate it forward to the normal operating position. Lower the base support of the seat. NOTE: Charge the batteries before using. Page -10- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 11: Battery Maintenance

    Do not allow ammonia or bicarbonate of soda to get into the batteries. Keep the batteries charged. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A...

  • Page 12: How To Charge The Batteries

    The correct Clarke battery part number can be Figure 5 found on the Clarke battery label affi xed to the top of each battery. If the replacement battery is a different Clarke battery, please con- tact Clarke Technical Service, 1-800-356-7274, for instructions.

  • Page 13: Level Indicators For The Charge On The Batteries

    NOTE: As the rear squeegee blade wears, it can be rotated and/or fl ipped to obtain four good edges before having to change blades. ” minimum Figure 10 Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 13 -...

  • Page 14: How To Change Or Rotate Brushes On Cylindrical Brush Head

    8. Raise door and install thumb screw. 9. Place side skirt on retainer pins and lower in place. Figure 12 Figure 13 Figure 14 Page -14- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 15: How To Install And Remove The Brush Or Pad On The Boost Head

    3. Turn the key switch “OFF”. 4. Go to the side of the machine. 5. Pull downward on the brush or pad until it releases from the fl ex plates. See fi gure 16. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A...

  • Page 16: How To Operate The Machine

    The middle position is for medium weight operators. The bottom position is for heavy weight operators. See fi gure 20, B. NOTE: The lever must be pressed fi rmly to change positions. Figure 20 Page -16- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 17: How To Read The Battery Meter

    fl ash, warning the operator of the need to empty the recovery tank. The vacuum motors will shut down a few moments later. NOTE: Recovery times will vary depending on Figure 23 Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A...

  • Page 18: How To Operate The Squeegee And The Vacuum Motor

    (fi gure 27). 2. Press and hold the “ - “ side of the switch to achieve minimum or no brush pressure. Figure 27 Page -18- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 19: How To Fill The Solution Tank

    Only use a cleaning concentration recommended by the chemical manufacturer. WARNING: Clarke recommends a maximum water tem- perature of 120°F (49°C). Operating the Machine NOTE: Before scrubbing with the machine, become familiar with the opera- tions and handling of the machine.

  • Page 20: Do These Procedures When You Begin Your Work Period

    Make sure that the brushes/pads are in position and installed cor- rectly. Figure 32 Make sure the brush housings are in position on the brush head. Check the installation of the squeegee and squeegee hose. Page -20- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 21: How To Clean A Floor

    2 inches (5 cm) of the area already cleaned by the brush. NOTE: During most cleaning procedures, apply and remove the solution in one operation. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 21 -...

  • Page 22: How To Clean A Very Dirty Floor

    10. Empty the recovery tank. NOTE: When hose is lowered below water level, water will fl ow. WARNING: Use gloves to protect your hands from contact with dangerous solutions when preforming the steps listed above. Page -22- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...
  • Page 23 18. Charge the batteries. See the instructions in the section of this book called “How to Charge the Batteries”. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 23 -...

  • Page 24: Maintenance

    (see fi gure 37). NOTE: Make sure that the tank is empty fi rst. Rinse the tank and clean the drain plug. Page -24- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 25: Cleaning The Solution Tank And Filter

    To replace the front squeegee blade, follow this procedure: Remove the squeegee assembly from the machine. Remove clamp and front squeegee blade. Install new front squeegee blade and reinstall clamp. Replace squeegee on machine. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 25 -...

  • Page 26: Rear Squeegee Blade Replacement

    Recovery hose is located behind threaded lip (see fi gure 41, A). NOTE: Do not place hose in vacuum intake tube (see fi gure 41, B), dam- age will occur. Page -26- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 27: How To Correct Problems In The Machine

    The batteries are not charged or not connected traversing. properly. Connect the electrical connection at the brush head unit. Poor electrical connection at the brush head unit. Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 27 -...

  • Page 28: Common Error Codes

    Brushes not fi tted. Place brushes or pads onto machine. 9000 Drive system activated prior Release traverse switch and reactivate. 2F01 to turning key switch “ON”. Page -28- Form No. 71171A Clarke ® Operator’s Manual (EN) - Focus Rider...

  • Page 29: Accesories And Options

    10876A Solution and Recovery Tank Level Indicator Lights 10877A Caution Strobe Light (Amber) 10878A Deluxe Seat 10879S Head Light 53390A CBMS - Clarke Battery Maintenance System Clarke ® Operator’s Manual (EN) - Focus Rider Form No. 71171A - 29 -...
  • Page 30 Este manual contiene información importante acerca del uso y la seguridad de la máquina. Si no lee el manual antes de utilizar su máquina Clarke o de intentar realizar los procedimientos de reparación o mantenimiento de la misma, usted o el resto del personal podrían sufrir lesiones;...

  • Page 31: Instrucciones De Seguridad Para El Operador

    Usted o el resto del personal pueden sufrir lesiones si no leen el manual de instrucciones antes de operar, intentar reparar, o realizar mantenimiento a su máquina Clarke. Asimismo, pueden producirse daños a la máquina o a otras propiedades. Antes de utilizar la máquina, usted debe haber recibido capacitación adec- uada en la operación de la misma.
  • Page 32 PRECAUCIÓN: Si utiliza esta máquina para desplazar otros objetos o para subirse a la misma se pueden producir lesiones o daños. No utilice esta máquina como escalera ni como mueble. PRECAUCIÓN: Si no utiliza los repuestos originales de Clarke la garantía de la máquina se anulará. Utilice siempre repuestos de Clarke.

  • Page 33: Introducción Y Especifi Caciones De La Máquina

    Productos en tales entornos. El Fabricante niega toda responsabilidad de informar a los compradores sobre requisitos específi cos que pueden regir el uso de los Productos en tales entornos. Clarke ® Manual del operador (ES) - Focus Rider Form No.

  • Page 34: Interruptor On/Off (Encendido/ Apagado)

    Pulsación única RIESGO DE LESIONES O DE DA- ÑOS A LA MAQUINA. • No debe hacerse girar, detener o dejar la maquina en una rampa o 71018A muella. Clarke ® -34- Form No. 71171A Manual del operador (ES) - Focus Rider...
  • Page 35 Sólo el diagnóstico. No aparece a menos que se pro- duzca un fallo de la máquina. El icono y el código de error aparecen en pantella cuando se produce el fallo. Clarke ® Manual del operador (ES) - Focus Rider Form No.

  • Page 36: Panel De Control De La Máquina

    Los disyuntores son los siguientes: Elemento A - Principal (5 amperes) Elemento B – Interruptor de llave (5 amperes) Clarke ® -36- Form No. 71171A Manual del operador (ES) - Focus...

  • Page 37: Controles Y Funciones De La Máquina

    Consulte la Figura 2. Alarma de la reversa La alarma de la reversa suena de forma intermitente y automática cuando la máquina está en reversa. Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A...

  • Page 38: Preparación De La Máquina Para Su Funcionamiento

    Gire el tanque de recuperación y después gírelo cuidadosamente hacia adelante hasta la posición de funcionamiento normal. Baje el apoyo de la base del asiento. NOTA: Cargue las baterías antes del uso. Clarke ® -38- Form No. 71171A Manual del operador (ES) - Focus...

  • Page 39: Mantenimiento De Las Baterías

    No permita que el amoníaco o el bicarbonato de sodio ingresen a las baterías. Mantenga las baterías cargadas. Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A...

  • Page 40: Carga De Las Baterías

    Servicio Técnico de Clarke al número 800-356-7274 para recibir más instrucciones. Si la batería de reemplazo no es una batería de Clarke por favor contacte al fabricante del cargador para recibir instrucciones. Para cargar las baterías siga este procedimiento: Asegúrese de que el interruptor de llave se encuentra en la posición...

  • Page 41: Indicadores De Nivel De Carga De Las Baterías

    NOTA: A medida que se gasta la hoja de la escobilla de goma trasera, se minimum la puede girar y/ o dar vuelta para obtener cuatro bordes buenos antes de tener que cambiar las hojas. Figura 10 Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A - 41 -...

  • Page 42: Métoda Para Cambiar Orotar Los Cepillos En El Cepillo Cilíndrico Cabezal

    Coloque el faldón lateral sobre las clavijas de retención y baje colo- cando en su lugar. Los cepillos deberán rotarse después de cada 20 horas de uso. Figura 13 Figura 14 Clarke ® -42- Form No. 71171A Manual del operador (ES) - Focus...

  • Page 43: Instalación De La Cepillo O La Almohadilla (Boost)

    4. Diríjase a la parte lado de la máquina. 5. Tire del ceplillo o de la almohadilla hacia abajo hasta que se suelte de las placas fl exibles. Ver fi gura 16. Clarke ® Manual del operador (ES) - Focus Rider Form No.

  • Page 44: Operación De La Máquina

    La posición inferior es para los opera- dores muy pesados. Consulte la fi gura 20, B. NOTA: Para cambiar las posiciones se debe oprimir la palanca con fi rmeza. Figura 20 Clarke ® -44- Form No. 71171A...

  • Page 45: Lectura Del Medidor De Carga De La Batería

    NOTA: El tiempo que demora en llenarse el depósito de recuper- ación varía según la confi guración del fl ujo de solución y según el tipo de piso. Figura 23 Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A...

  • Page 46: Operación De La Escobilla De Goma Y Del Motor De Vacío

    Presione el lado “ - “ del interruptor (fi gura 27). Presione y mantenga el lado “ - ” del interruptor para alcanzar para lograr mínimo presión o ninguna presión de los cepillos. Figura 27 Clarke ® -46- Form No. 71171A...

  • Page 47: Delantero / Inverso

    Utilice sólo la concentración de limpieza recomendada por el fabricante de productos quími- cos. ADVERTENCIA: Clarke recomienda un máximo de temperatura para el agua de 120°F (49°C). Operación de la máquina NOTA: Antes de utilizar la máquina familiarícese con las operaciones y el manejo de la misma.

  • Page 48: Efectúe Estos Procedimientos Al Comienzo Del Período De Trabajo

    Compruebe que los alojamientos de los cepillos estén en posición en el cabezal del cepillo. Verifi que la instalación de la escobilla de goma y de la manguera de la misma. Clarke ® -48- Form No. 71171A Manual del operador (ES) - Focus...

  • Page 49: Limpieza De Pisos

    2 pulgadas (5 cm) de la superfi cie que el cepillo ya limpió. NOTA: Durante la mayoría de los procedimientos de limpieza aplique y saque la solución en una operación. Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A...

  • Page 50: Limpieza De Pisos Muy Sucios

    ésta fl uye . ADVERTENCIA: Use guantes para protegerse las manos del contacto con soluciones peligrosas cuando siga los pasos enumerados anteriormente. Clarke ® -50- Form No. 71171A Manual del operador (ES) - Focus...
  • Page 51 Siempre utilice protección ocular y ropa de protección cuando trabaje cerca de baterías. 18. Cargue las baterías. Consulte las instrucciones incluidas en la sec- ción de este manual llamada “Carga de las baterías”. Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A...

  • Page 52: Mantenimiento

    (consulte la fi gura 37). NOTA: Primero compruebe que el depósito está vacío. Enjuague el depósito y limpie el tapón de drenaje. Clarke ® -52- Form No. 71171A...

  • Page 53: Limpieza Del Depósito De Solución Y Del Fi Ltro

    Saque la abrazadera y la hoja delantera de la escobilla de goma. Coloque la hoja delantera de la escobilla de goma delantera nueva y vuelva a colocar la abrazadera. Vuelva a colocar la escobilla de goma en la máquina. Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A...

  • Page 54: Reemplazo De La Hoja De La Escobilla De Goma Trasera

    La manguera de recuperación està ubicada detràs del borde roscado (consulte la fi gura 41, A). NOTA: No coloque la manguera en la entrada de vacío (consulte la fi gura 41, B), se producirán daños. Clarke ® -54- Form No. 71171A...

  • Page 55: Corrección De Problemas De La Máquina

    Realice la conexión eléctrica en la unidad del La conexión eléctrica en la unidad del cabezal del cepillo. cabezal del cepillo no es buena. Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A - 55 -...

  • Page 56: Códigos De Error Comunes

    Libere el interruptor de desplazamiento El sistema de impulsión se 2F01 y vuelva a activar. ha activado antes de girar el interruptor de llave a la posición “ON” (encendido). Clarke ® -56- Form No. 71171A Manual del operador (ES) - Focus Rider...
  • Page 57 Luces indicadoras de nivel del depósito de solución y recuperatión 10877A Luz estroboscópica de precaución (Ámbar) 10878A Asiento de lujo 10879S Faro delantero 53390A CBMS - Sistema de mantenimiento de batería Clarke Clarke ® Manual del operador (ES) - Focus Rider Form No. 71171A - 57 -...
  • Page 58 Ce Manuel contient des informations importantes concernant l’utilisation et le fonctionnement de cette machine dans des conditions de sécurité optimales. La non-lecture de ce manuel avant d’utiliser ou d’entretenir votre machine Clarke risque de provoquer un accident ou d’endommager la machine ou son environnement. Vous devez avoir été formé à l’utilisation de cette machine avant de l’utiliser.

  • Page 59: Consignes De Sécurité Destinées À L'opérateur

    Manuel de l’utilisateur et sur la machine. DANGER : La non-lecture du Manuel de l’utilisateur avant d’utiliser ou de tenter d’entretenir votre machine Clarke est sus- ceptible de provoquer un accident ; un endommagement de la machine ou de son environnement est également possible.
  • Page 60 Ne pas utiliser cette machine comme marchepied ou comme meuble. ATTENTION : La garantie de votre machine sera annulée si vous utilisez d’autres pièces que les pièces d’origine Clarke sur votre machine. N’utilisez que des pièces de rechange Clarke.

  • Page 61: Introduction Et Caractéristiques De La Machine

    & rempli de produit Garantie 8 ans pour les réservoirs Polydur , 3 ans pour les pièces, 1 an main d’oeuvre, 18 mois au prorata pour les batteries Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 61 -...

  • Page 62: Focus Sur Les Symboles Utilisés

    • Ne pas utiliser de matiere infl ammable. RISQUE DE BLESSURE OU DE DOMMAGE MATE- Bouton One Touch RIEL • Ne pas tourner, arreter ou laisser la machine sur une 71018A Clarke ® -62- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 63: Ecrans Visibles Par L'opérateur

    Destiné au diagnostic uniquement. Reste éteint tant que la machine ne présente pas de panne. Lor- sque l’erreur se produit, l’icône et le code d’erreur s’affi chent. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 63 -...

  • Page 64: Panneau De Commande De La Machine

    Les coupe-circuits sont les suivants : Disjoncteur A - Secteur (5 A) Disjoncteur B - commutateur à clé (5 A) Clarke ® -64- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 65: Commandes Et Fonctions De La Machine

    Voir la fi gure 2. Avertisseur de marche arrière L’avertisseur de marche arrière émet automatiquement un son intermittent lorsque la machine recule. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 65 -...

  • Page 66: Préparation De La Machine Avant Son Utilisation

    Faites pivoter le réservoir de récupération puis ramenez-le douce- ment vers l’avant en position normale. Abaissez le support du siège. REMARQUE : charger les batteries avant utilisation. Clarke ® -66- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 67: Entretien Des Batteries

    Pour nettoyer les bornes et les connecteurs, utilisez un outil de net- toyage spécifi que. Ne laissez pas l’ammoniaque ou le bicarbonate de soude pénétrer dans les batteries. Veillez à ce que les batteries soient chargées. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A...

  • Page 68: Chargement Des Batteries

    REMARQUE : Remplacez les batteries par un ensemble de batteries Clarke identique au jeu de batteries d’origine. Le numéro de pièce correct de la batterie Clarke fi gure sur l’étiquette de batterie Clarke apposée sur le dessus de chaque batterie.

  • Page 69: Préparation De La Machine Avant Son Utilisation

    REMARQUE : Au fur et à mesure de son usure, le balai de raclette ar- minimum rière peut être tourné afi n de pouvoir utiliser quatre bords neufs avant de devoir changer le balai. Figure 10 Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 69 -...

  • Page 70: Comment Changer Ou Faire Pivoter Les Brosses Sur La Tête À Brosse Cylindrique

    Placer la jupe latérale sur les broches de fi xation et l’abaisser pour la mette en place. 10. Il est nécessaire de faire pivoter les brosses toutes les 20 heures d’utilisation environ. Figure 13 Figure 14 Clarke ® -70- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 71: Installation De Brosse Ou De Disque (Boost Tm )

    4. Allez à le côté de la machine. 5. Baissez en tirant sur la brosse ou le disque jusqu’à ce qu’elle ou il se dégage des plaques fl exibles. Voir fi gure 16. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A...

  • Page 72: Utilisation De La Machine

    La position inférieure est destinée aux opérateurs lourds. Voir la fi gure 20, B.REMARQUE : Appuyez fermement sur la manette pour la changer de position. Figure 20 Clarke ® -72- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 73: Lecture De L'indicateur Du Niveau De Charge Des Batteries

    REMARQUE : Les intervalles entre les vidanges dépendent du réglage de l’écoulement de la solution et du type de sol. Figure 23 Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 73 -...

  • Page 74: Utilisation De La Raclette Et Du Moteur D'aspiration

    Pressez le côté « - » du l’interrupteur (fi gure 27). Pressez et maintenez l’interrupteur « - » pour atteindre le niveau mini- mum de pression ou aucune pression. Figure 27 Clarke ® -74- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 75: Comment Fonctionner Le Commutateur D'avant Et Inverse

    N’utilisez que la concentration de liquide de nettoyage recommandée par le fabricant du produit. AVERTISSEMENT : Clarke recommande une température d’eau maximum de 49°C. Utilisation de la machine REMARQUE : Avant de nettoyer un sol avec la machine, familiarisez-vous avec le fonctionnement et la manipulation de la machine.

  • Page 76: Utilisation De La Machine (Suite)

    Figure 32 Assurez-vous que les brosses/tampons sont en position et cor- rectement installés. Assurez-vous que les compartiments des brosses sont en posi- tion sur la tête de brossage. Clarke ® -76- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 77: Nettoyage D'un Sol

    5 cm. REMARQUE : Lors de la plupart des opérations de nettoyage, vous appliquerez et retirerez la solution en une seule et même opération. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A...

  • Page 78: Nettoyage D'un Sol Très Sale

    à s’écouler. AVERTISSEMENT : Utilisez des gants pour protéger vos mains de tout contact avec des solutions dangereuses lorsque vous effectuez les opéra- tions suivantes. Clarke ® -78- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...
  • Page 79 à proximité des batteries. 18. Chargez les batteries. Consutez les instructions données dans la sec- tion de ce Manuel intitulée « Rechargement de la batterie ». Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A...

  • Page 80: Maintenance

    (voir fi gure 37). REMARQUE : avant toute chose, assurez-vous que le réservoir est vide. vidange. Rincez le réservoir et nettoyez le bouchon de Clarke ® -80- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 81: Nettoyage Du Réservoir De Solution Et Du Fi Ltre

    Retirez la fi xation et le balai de raclette avant. Installez un nouveau balai de raclette avant et remettez la fi xation en place. Remontez la raclette sur la machine. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A...

  • Page 82: Remplacement De La Lame De La Raclette Arrière

    Le tuyau de récupération se situe à l’arrière de la bague fi letée (voir fi gure 41, A). REMARQUE : Ne placez pas le fl exible dans une entrée d’aspiration (voir fi gure 41, B) afi n d’éviter tout endommagement. Clarke ® -82- Form No. 71171A...

  • Page 83: Resolution Des Problemes Rencontres Avec La Machine

    à avancer. Branchez la connexion électrique des brosses. Mauvaise connexion électrique des brosses. Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 83 -...

  • Page 84: Laveuse Focus Rider Codes D'erreurs Courantes

    Placez des brosses ou patins sur la machine. Systéme d’entraînement activé 2F01 Désengagez l’interrupteur latéral et avant de tourner la clé sur la réactivez. positon « ON » (« Marche »). Clarke ® -84- Form No. 71171A Manuel de l’utilisateur (FR) - Focus Rider...

  • Page 85: Accessoires Et Options

    Voyants indicateurs du niveau des réservoirs de solution et de récupération 10877A Lumière stroboscopique d’avertissement (orange) 10878A Siège De Luxe 10879S Phare avant 53390A CBMS - Système Clarke d’entretien de la batterie Clarke ® Manuel de l’utilisateur (FR) - Focus Rider Form No. 71171A - 85 -...
  • Page 86 NOTE Clarke ® Page -86- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 87: Section Ii Pièces Et Manuel D'entretien

    Rider Scrubber Section II Parts and Service Manual (71171A) U.S. Patent No. 6,105,192; No. RE39,581; No. 6,557,207; No. 7,185,397; and Patents Pending Canada Patent No. 2,353,279 (Deluxe Machines) Clarke ® Operator’s Manual - Focus Rider Scrubber Form No. 71171A Page -87-...

  • Page 88: Final Assembly Drawing

    Clarke ® FOCUS Rider Scrubber Final Assembly Drawing 8/06 Clarke ® Page -88- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 89: Parts List

    Clarke ® FOCUS Rider Scrubber Final Assembly Parts List 11/06 Part No. Description Rotary Cyl. Boost pg 100-101 Tank, Recovery (Assembly) pg 100-101 Tank, Recovery (Assembly) pg 102-105 Tank, Solution (Assembly) pg 102-105 Tank, Solution (Assembly) pg 118 Plate, Electrical (28”) pg 118 Plate, Electrical (34”)

  • Page 90: Main Frame Assembly Drawing (Rotary)

    Clarke ® FOCUS Rider Scrubber Main Frame Assembly Drawing (Rotary) 3/08 Drawing #11098A 1A, 1B 19, 19A, 19B See Detail A Clarke ® Page -90- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 91: Parts List

    Clarke ® FOCUS Rider Scrubber Main Frame Assembly Parts List (Rotary) 12/09 Drawing # 11098A Part No. Description 53386B Actuator, Head Lift 40910A Potentiometer & Circuit Borad 40866A Housing Potentiometer 766780 Pin, Hair 82501A Pin, Clevis 40889A Horn 962288 Bolt, 3/8-16 x 1 Hex Hd 170883 Washer, Lock 3/8”...

  • Page 92: Main Frame Assembly Drawing (Cylindrical)

    Clarke ® FOCUS Rider Scrubber Main Frame Assembly Drawing (Cylindrical) 3/08 Drawing #10949S 3A, 3B 22, 22A, 22B See Detail A Clarke ® Page -92- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 93: Parts List

    Clarke ® FOCUS Rider Scrubber Main Frame Assembly Parts List (Cylindrical) 12/09 Drawing # 10949S Part No. Description 766780 Pin, Hair 82501A Pin, Clevis 40771A Actuator, Head Lift 40910A Potentiometer & Circuit Borad 40866A Housing Potentiometer 40836A Horn 962288 Bolt, 3/8-16 x 1 Hex Hd.

  • Page 94: Main Frame Assembly Drawing (Boost)

    Clarke ® FOCUS Rider Scrubber Main Frame Assembly Drawing ( ) 3/08 Drawing #11107A 2A, 2B 12, 12A, 12B Clarke ® Page -94- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 95: Parts List

    Clarke ® FOCUS Rider Scrubber Main Frame Assembly Parts List ( ) 12/09 Drawing # 11107A Part No. Description 766780 Pin, Hair 53874A Actuator, Head Lift 40910A Potentiometer & Circuit Borad 40866A Housing Potentiometer 82501A Pin, Clevis 40836A Horn 962288 Bolt, 3/8-16 x 1 Hex Hd.

  • Page 96: Optional Side Squeegee Lift (28 & 34 Rotary Models)

    Clarke ® FOCUS Rider Scrubber 28” & 34” Rotary Models Optional Side Squeegee Lift Assembly Drawing 3/05 Clarke ® Page -96- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 97: Parts List

    Clarke ® FOCUS Rider Scrubber 28” & 34” Rotary Models Optional Side Squeegee Lift Assembly Parts List 3/05 Part No. Description 87624A Washer, Nylon 1 1/2 x 1/4 x 1/8 86004A Screw, 1/4-20 x 1.50 HHCS 920296 Nut, 10-24 Elastic Stop 61699A Bracket, Sq.

  • Page 98: Front Wheel Assembly Drawing And Parts List

    Clarke ® FOCUS Rider Scrubber Front Wheel Assembly Drawing and Parts List 6/07 Drawing #10779A Part No. Description 80267A Bolt, 3/4 - 16 Hex Head 61472A Yoke Weldment, Steering 980645 Washer, 3/8 Flat 170883 Washer, Lock 3/8 85822A Screw, 3/8 -16 x 7/8 Hex Hd.

  • Page 99: Squeegee Lift Assembly Drawing And Parts List

    Clarke ® FOCUS Rider Scrubber Squeegee Lift Assembly Drawing and Parts List 4/06 Drawing #10787A / 10949A Part No. Description Part No. Description 66531A Pin, Swing Arm 980652 Washer, 5/16 Lock 962798 Screw, 10-24 x 1/2 PH 980651 Washer, 5/16 Flat...

  • Page 100: Recovery Tank Assembly Drawing

    Clarke ® FOCUS Rider Scrubber Recovery Tank Assembly Drawing 6/07 Drawing #10783A / 10990A 18, 18A Clarke ® Page -100- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 101: Parts List

    Clarke ® FOCUS Rider Scrubber Recovery Tank Assembly Parts List 12/09 Drawing # 10783A / 10990A Part No. Description 52206A Chain, Drain Asm. 962957 Screw, 10 -16 x 1/2 Self Tab 30227A Housing, Drain 40002A Switch, Float Electrical 30622A Hose, Vac Exhaust...

  • Page 102: Solution Tank Assembly Drawing (View 1)

    Clarke ® FOCUS Rider Scrubber Solution Tank Assembly Drawing (View 1 of 2) 11/06 Drawing # 11099A Clarke ® Page -102- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 103: Parts List (View 1)

    Clarke ® FOCUS Rider Scrubber Solution Tank Assembly Parts List (View 1 of 2) 6/07 Drawing # 11099A Part No. Description 193944 Grommet 85811A Screw, 5/16 - 18 x 3/4 Hex Head 980651 Washer, 5/16 Flat 61492B Plate, Seat Assembly...

  • Page 104: Solution Tank Assembly Drawing (View 2)

    Clarke ® FOCUS Rider Scrubber Solution Tank Assembly Drawing (View 2 of 2) 8/06 Drawing # 11099A Clarke ® Page -104- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 105: Parts List (View 2)

    Clarke ® FOCUS Rider Scrubber Solution Tank Assembly Parts List (View 2 of 2) 8/06 Drawing # 11099A Part No. Description 30530A Tank, Solution 962957 Screw, 10-16 x 1/2 Self Tap 87036A Washer, #10 Flat 30539B Lid, Solution 30578A Gasket, Solution Tank Fill...

  • Page 106: Steering Column Assembly Drawing

    Clarke ® FOCUS Rider Scrubber Steering Column Assembly Drawing 12/09 Drawing # 11087A Clarke ® Page -106- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 107: Parts List

    Clarke ® FOCUS Rider Scrubber Steering Column Assembly Parts Lisst 12/09 Drawing # 11087A Part No. Description 980648 Washer, 17/32 x 1 1/16 Plain 424069 Nut, 1/2-13 Hex Nyloc 56497543 Cap, Steering Wheel 80328A Washer, Flat 56497306 Wheel, Steering 56497560...
  • Page 108 Clarke ® FOCUS Rider Scrubber 28” Rotary Brush Head Assembly Drawing and Parts List 9/07 Drawing #10697A 1, 1A Part No. Description Part No. Description 40904B Motor, Dual Gear Box 980638 Washer, 3/8 Lock 915102 59856A Washer, Rubber 40968A Carbon Brush/Spring Set (incl. 4 of each)
  • Page 109 Clarke ® FOCUS Rider Scrubber 34” Rotary Head Assembly Drawing and Parts List 9/07 Drawing #10698A 1, 1A Part No. Description Part No. Description 40905B Motor, Dual Gear Box 782002 Clamp, Manifold 915902 170915 Screw, 1/4 - 20 x 3/4 Hex HD 40968A Carbon Brush/Spring Set (incl.

  • Page 110: 28" Cylindrical Head Assembly Drawing

    Clarke ® FOCUS Rider Scrubber 28” Cylindrical Head Assembly Drawing 3/05 Drawing #10962A Clarke ® Page -110- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 111: Parts List

    Clarke ® FOCUS Rider Scrubber 28” Cylindrical Head Assembly Parts List 3/05 Drawing #10962A Part No. Description 980638 Washer, 3/8 Lock 962244 Bolt, 3/8-16 x .75 Hex 30649A Hose, Solution 50248A Clamp, Hose 40772A Motor, Brush 980646 Washer, 1/4” Flat...

  • Page 112: 32" Boost Head Assembly Drawing

    Clarke ® FOCUS Rider Scrubber 32” Head Assembly Drawing 12/09 Drawing #11103A Clarke ® Page -112- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 113: Parts List

    Clarke ® FOCUS Rider Scrubber 32” Head Assembly Parts List 12/09 Drawing #11103A Part No. Description 782002 Clamp, Manifold 920365 Nut 1/2-13 Nylock 925589 Pin, Roll 962098 Screw, 1/4-20 X 3/4 F.H. 962288 Bolt, 3/8-16 X 1.00 Hex Hd. 980022...

  • Page 114: 32" Squeegee Assembly Drawing

    Clarke ® FOCUS Rider Scrubber 32” Squeegee Assembly 10129A 12/09 Drawing # 10802A Clarke ® Page -114- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 115: Parts List

    Clarke ® FOCUS Rider Scrubber 32” Squeegee Assembly 10129A 12/09 Drawing # 10802A Ref. # Part No. Description 80252A Screw, ¼-20 x 1 Hex SS 980657 Washer, ¼ Lock 60243A Bracket, Squeegee Wheel 30049B Wheel, Squeegee 81104A Nut, ¼-20 60254A Bolt, Shoulder x 2¼...

  • Page 116: 39" Squeegee Assembly Drawing

    Clarke ® FOCUS Rider Scrubber 39” Squeegee Assembly 10068A 12/09 Drawing # 10802A Clarke ® Page -116- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 117: Parts List

    Clarke ® FOCUS Rider Scrubber 39” Squeegee Assembly 10068A 12/09 Drawing # 10802A Ref. # Part No. Description 80253A Screw, ¼-20 x 1½ Hex SS 980657 Washer, ¼ Lock 60243A Bracket, Squeegee Wheel 30049B Wheel, Squeegee 81104A Nut, ¼-20 60254A Bolt, Shoulder x 2¼...

  • Page 118: 41" Squeegee Assembly Drawing

    Clarke ® FOCUS Rider Scrubber 41” Squeegee Assembly 11041L 12/09 Drawing # 11040L Clarke ® Page -118- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 119: Parts List

    Clarke ® FOCUS Rider Scrubber 41” Squeegee Assembly 11041L 12/09 Drawing # 11040L Ref. # Part No. Description 80253A Screw, ¼-20 x 1½ Hex SS 980657 Washer, ¼ Lock 60243A Bracket, Squeegee Wheel 30049B Wheel, Squeegee 81104A Nut, ¼-20 60254A Bolt, Shoulder x 2¼...

  • Page 120: Front Squeegee Assembly Drawing And Parts List

    Clarke ® FOCUS Rider Scrubber Front Squeegee Assembly Drawing and Parts List 8/05 (Rotary Machines Only) Drawing # 10694A Part No. Description 80275A Screw, 1/4 - 14 x 3/4 53185A Ring, Retainer 30048A Wheel, Guide 61496A Weldment, Fr. Squeegee Base...

  • Page 121: Front Squeegee Arm Assembly Drawing And Parts List

    Clarke ® FOCUS Rider Scrubber Front Squeegee Arm Assembly Drawing and Parts List 12/09 (Rotary Machine Only) Drawing # 10696A Part No. Description 61548A Arm, Weldment Squeegee 81112A Nut, 5/16-18 Thin ESNA 67867A Spacer, Squeegee Swivel 60256A Arm, Squeegee Pivot...

  • Page 122: Electrical Panel Assembly Drawing And Parts List

    Clarke ® FOCUS Rider Scrubber Electrical Panel Assembly Drawing and Parts List 12/09 Drawing # 11091A, 107825, 109613, 109895 Clarke ® Page -122- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...
  • Page 123 Clarke ® FOCUS Rider Scrubber Electrical Panel Assembly Drawing and Parts List 12/09 Drawing # 11091A, 107825, 109613, 109895 Part No. Description 980614 Washer, 1/4” Starlock Ext. 40932A Harness, Main Power 854849 Post, Isolation 83302A Stud, 1/4-20 87026A Washer, 1/4 Flat SS...

  • Page 124: Electrical Connection Diagram

    Clarke ® FOCUS Rider Scrubber Electrical Connection Diagram 8/06 (pages 124-127) Clarke ® Page -124- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...
  • Page 125 Clarke ® FOCUS Rider Scrubber Electrical Connection Diagram 8/06 (pages 124-127) Clarke ® Operator’s Manual - Focus Rider Scrubber Form No. 71171A Page -125-...
  • Page 126 Clarke ® FOCUS Rider Scrubber Electrical Connection Diagram 8/06 (pages 124-127) Clarke ® Page -126- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...
  • Page 127 Clarke ® FOCUS Rider Scrubber Electrical Connection Diagram 8/06 (pages 124-127) Clarke ® Operator’s Manual - Focus Rider Scrubber Form No. 71171A Page -127-...

  • Page 128: Electrical Schematic

    Clarke ® FOCUS Rider Scrubber Electrical Schematic 8/06 Clarke ® Page -128- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...
  • Page 129 Clarke ® FOCUS Rider Scrubber Rider Electrical Options and Ground Connections 8/06 Clarke ® Operator’s Manual - Focus Rider Scrubber Form No. 71171A Page -129-...
  • Page 130 NOTE Clarke ® Page -130- Form No. 71171A Operator’s Manual -Focus Rider Scrubber...

  • Page 132: Battery Warranty

    Clarke product. Return the card to assist Clarke in providing the performance you expect from your new fl oor machine. If a diffi culty develops with the product, you should: a) Contact the nearest authorized Clarke repair location or contact Nilfi sk- Advance Inc.

Ce manuel est également adapté pour:

Focus 00310cFocus 00311sFocus 00311cFocus 00312sFocus 00312cFocus 00317s ... Afficher tout

Table des Matières