Bresser GPS 7x50 Mode D'emploi page 15

PARTS OVERVIEW
Eyepiece
Twist-up eyecups
Centre axle
Individual eyepiece adjustment
Strap holder
GPS receiver
¶
Threaded tripod connection
º
Battery compartment
¾
Objective lens
CHANGING THE BATTERIES
When the remaining battery level gets low, the battery indicator on the external LCD (14) will blink.
If the battery indicator blinks, please replace with two units of AAA alkaline batteries. Make sure
the polarity is correct.
TWIST-UP EYECUPS
Screw in the twist-up eyecups (2) to use the binoculars while wearing glasses. If you are not wear-
ing glasses, unscrew the eyecups to achieve the required distance from the pupils.
ADJUSTING THE EYEPIECE DISTANCE
The distance between the eyes differs between individuals. To achieve perfect interaction between
your eyes and the eyepieces of your binoculars set the angle at the centre of the binoculars (3) so
that you see a circular image (10). Note this setting for later use.
FOCUSSING
Your binoculars have individual eyepiece adjustment (4). Turn the adjustment rings on both sides
to focus on a distant object. Individual focussing is intended to give you better focus depth so that
when changing between objects of different distance, refocusing is only needed if the difference
is really major.
MOUNTING THE BINOCULARS ON A TRIPOD
Your binoculars have a threaded tripod connection (7) built in. The required tripod adapter is avail-
able as an optional accessory (Art. No. 19-16000 or 19-16500). With this accessory, you are able
to mount your binoculars on a tripod with a DIN mounting thread (e.g. Art. No. 49-22100).
GPS BINOCULARS – POWER ON/OFF
• Press the [POWER] button (12) for approximately 1 second to switch on.
• Press the [POWER] button (12) for approximately 3 seconds to switch off.
µ
Correctly set eye distance
¸
[SAVE] button
¹
[POWER] button
[MODE] button
External LCD
Internal LCD
Reticle
Digital compass
+
- 15 -
DE
GB
FR
ES