Seamless Loop/Hot Start/Stutter - Denon DN-D6000 Mode D'emploi

ENGLISH

SEAMLESS LOOP/HOT START/STUTTER

8
Seamless Loop/Hot Start/Stutter (A1, A2 buttons)
q w y
, ,
t y e
,
,
Operation display (refer to the
section describing the display)
Setting the A point (loading the Hot Start
data)
q Push the A1 or A2 button to
set the A point and Hot Start
data loading starts.
• A1 and A2 buttons can be
used separately for each
1
Hot Start.
• When an A point is
corresponding A button and "
display light and that button is set to the
Hot Start mode.
• The BPM is set independently for each
Hot Start automatically.
Starts Hot Start
w When A1 or A2 button is
2
pushed, Hot Start playback
starts from the
corresponding A point.
Setting the B point for Seamless Loop
e When the B button is
pushed after setting the A
3 point or after starting Hot
-1
start playback, the B point is
set and Seamless Loop
playback starts from the A
point.
14
r
y
• The B button works with respect to the
A point operated before the B button
3
was pushed.
-1
• If the B button is pushed during
Seamless Loop playback or after EXIT
playback, the B point moves to the point
set, the
at which the button was pushed.
"
3
• When the B point is set, the B and "
-2
displays light.
Playing Seamless Loops
• When the B point for A1 is detected
after playback started from A1 point,
playback returns to A1 point with
seamless. While A1 to B looping, B point
for A2 ignored.
• When the B point for A2 is detected
4
after playback started from A2 point,
playback returns to A2 point with
seamless. While A2 to B looping, B point
for A1 ignored.
Exit/Reloop
r In Seamless Loop playback,
you can force exit from or
return to the loop.
EXIT:
While the Seamless Loop playback, push
5
the EXIT/RELOOP button to exit from
loop. DN-D6000 continues playback after
the B point.
RELOOP:
When the EXIT/RELOOP button is pushed
after exit the loop, Seamless Loop
playback resumes from the A point.
Stutter
• A1 and A2 points can be also used for
Stutter playback.
t To enable stutter playback,
push FLIP button for A1/A2
6
buttons, then " " display
turns off.
Press the FLIP button to switch between
the Hot Start/Seamless Loop and Stutter
modes.
Clear the A1/A2 point
y While pressing the FLIP/(CLR) button, push
the A1 or A2 button to clear the
corresponding A and B points.
Or push the FLIP button for more than 1
sec to clear both A1 and A2 points at once.
"
Quickly pressing the "FLIP" button first
7
and then A1 , A2 or B buttons will clear
these points individually.