Safety Information - Weller WT 1 Traduction De La Notice Originale

Read these instructions and the safety
guidelines carefully before starting up the unit
and starting work.
life and limb.
Keep these instructions in a place that is accessible to all
users. Please adhere to the operating instructions of the
connected devices.

Safety information

or mental capabilities or lack of experi-
given supervision or instruction concer-
and understand the hazards involved.
ance.
Cleaning and user maintenance shall
vision.
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorised
persons. Never allow other persons to touch the soldering
tool or cable.
Find Quality Products Online at:
-
-
-
GlobalTestSupply
www.
WARNING Electrical shock
Connecting the control unit incorrectly poses a risk
of injury due to electric shock and can damage the
device.
•
before putting the control unit into operation and observe
•
If the device is faulty, active electrical conductors may
be bare or the PE conductor may not be functional.
•
specialist.
•
organisation.
Protect yourself against electric shocks. The handles
on soldering tools with an antistatic design are conductive.
Avoid touching earthed objects such as pipes, heaters,
•
cookers and refrigerators.
Do not use the soldering tool in a damp or wet
•
environment.
•
WARNING Risk of burns
Risk of burns from the soldering tool while the control
unit is operating. Tools may still be hot long after they
have been switched off.
•
•
Risk of burning through liquid solder. Protect yourself
against solder splashes.
•
protectors.
When working with adhesives, special attention must be
•
manufacturer.
WARNING Fire hazard
Covering the soldering iron or the safety holder poses
soldering iron and safety holder.
•
•
from the hot soldering tool.
.com
GB
ENGLISH
15
sales@GlobalTestSupply.com