Structure And Assemblies; Technical Data; Transport And Storage; Storage - Trotec AirgoPro8 Manuel D'utilisation

aperture back into the room to be treated. During this
process, the oxygen contained in the room air is con-
verted into singlet oxygen (
discharge occurring between the electrodes, which
will then oxidatively degrade the odour molecules. The
devices of the AirgoPro series are plasma field genera-
tors that, apart from singlet oxygen, also produce very
little amounts of ozone (O
amounts, however, are not harmful to health.
The odour neutraliser can be used to effectively and
efficiently remove unpleasant odours such as kitchen
or musty smells, the smell of cigarette smoke, or the
lingering odour that remains after a fire etc.
The device has been designed and tested according
to the applicable safety standards and is provided
with a CE marking.

Structure and assemblies

11
1
2
1 Air inlet
2 Operating hours counter 8 Air outlet
3 Power connection
4 Power switch (On/Off)
5 Intensity level adjuster
6 Fan level adjuster
B-3
O ) by means of the corona
1
2
) (max. 0.05 ppm/m³). These
3
3
4
5
6
7 Timer
9 Electrode
10 Fan
11 Safety switch
Operating manual – AirgoPro 8 odour neutraliser

7. Technical data

Parameter
Electrical connection
Frequency
Power consumption
Air flow rate
Operating range temperature
Width
Length
Height
Weight

8. Transport and storage

Transport
10
9

Storage

8
Store the AirgoPro 8 in a dry place where it is pro-
tected from adverse weather effects. Choose a stor-
7
age location that is free of dust.
Always disconnect the device from the mains supply
when it is not in use.
Multiple devices can be stacked on top of one an-
other.
Value
230 V
50 Hz
20 W
120 m³/h
10 - 40 °C
230 mm
350 mm
250 mm
4.2 kg
Caution!
Damage to device due to vibra-
tions.
Strong vibrations can cause
damage to the electrode.
Make sure to always secure the
odour neutraliser during trans-
port in order to protect it against
vibrations and to prevent it from
slipping.
EN