Fortress Building Products Al13 HOME Instructions D'installation page 22

Step 4. Attach I-Support To Deck
1� Fasten I-Support to deck surface with the supplied Phillips
Head Wood Screw�
Tip: Pre-drill with a 1/16" [1.5mm] drill bit.
Fig. 1
Step 5. Bracket Caps.
1� Bracket Caps snap down over Bracket Cups�
• If you are installing a drink rail using the Cap Rail Clips, the
cap is installed under the bracket� See page1 1 for details�
• The top bracket cap can be installed when using an ATR but is
not required to be installed�
Fig. 1
PROUD POST: TENSION CABLE
• Reference page 38 for tensioning steps�
22
Fig. 2
AL HOME VERTICAL CABLE INSTALLATION
13