6. Press 2x the Start-Stop button (12) to turn on the appliance. The red 'Heating' indicator light lights up.
The coffee is being brewed.
•
Leave the thermo jug in it´s place until the coffee maker has finished.
•
The lid is hot when the appliance is turned on! Be careful when opening the lid during use. The hot
steam can cause burns.
operAtion - programming the coffee maker for a later time
When you have set the appliance's clock to the correct time, you can program it to brew coffee at a later time.
1. Press the program button (11). The green light and the display (14)will now be blinking
The display shows "12:00".
3. Press the hour button (12) to enter the correct hour. Every time you press the button the time will be
adjusted by a single hour. You may also keep the button the pressed to adjust the hours more quickly.
4. Press the miute button (13) to enter the correct minute. Every time you press the button the time will
be adjusted by a single minute. You may also keep the button the pressed to adjust the minutes more
quickly.
5. Release the buton and the display stops blinking after a few seconds. The display now shows the correct
time.
The timer has now been set. At the entered time, the coffee maker will start brewing coffee.The red 'Heating'
indicator light Start/Stop will then light up.
Please note: if power to the device is cut, the programming will be lost and the time will have to be
entered again.
cleAninG And MAintenAnce
1. Switch off the appliance
2. Remove the plug from the wall socket, and if necessary allow the appliance to cool.
3. Remove the filter holder from the device, and clean it under running water.
4. Clean the carafe in hot washing-up water, or put it in a dishwasher.
5. Clean the outside of the appliance with a damp cloth and washing-up liquid. Make sure no moisture gets
into the appliance.
•
Dry the inside of the device after use. This prolongs the durability of your device.
•
Never immerse the appliance, plug or power cord in water. Never put the appliance in a dishwasher.
Only the loose parts may be immersed in water.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - descaling
Limescale can reduce the efficiency of your coffee maker. Limescale is common in areas with hard water.
We advise the use of a suitable descaling agent to remove any scale. Always follow the instructions for the
descaling agent. The amount of scale will be reduced when you use a water softener.
GuArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
16
user's instructions