Cleaning And Maintenance - Bestron ACM800 Mode D'emploi

user's instructions

cleAninG And MAintenAnce

1. Switch off the appliance (On/off switch in the 'O' position: the pilot light
extinguishes).
2. Remove the plug from the wall socket, and if necessary allow the appliance to cool.
3. Dispose of the paper filter, where relevant. Remove the permanent filter from the casing, and clean
it under running water. Unlock the filter holder by pulling up the handle (see figure 2). Remove the
filter holder from the casing, and clean it under running water also. Place the filter holder back into the
casing and push the handle down to lock the filter holder. When refitting the filter holder make sure that
the non-drip nozzle projects through the opening in the filter casing.
4. Clean the glass pot in hot washing-up water, or put it in a dishwasher.
5. Clean the outside of the appliance with a damp cloth. Make sure no moisture gets
into the appliance.
• Never immerse the appliance, plug or power cord in water. Never put the appliance in a
dishwasher. Only the loose parts may be immersed in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - descaling
Limescale can reduce the efficiency of your coffee maker. Limescale is common in areas with hard water.
We advise the use of a suitable descaling agent to remove any scale. Always follow the instructions for the
descaling agent. The amount of scale will be reduced when you use a water softener.
the enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
Figure 2
Removing te filter holder
17