Adjusting Power; Technical Specifications - SPORT-ELEC FREE ACTION Manuel D'utilisation

VI. ADJUSTING POWER
See page 11 how to adjust power of stimulations.
= Reminder of the selected working area
= "zero power" touchscreen icon (press and hold)
IMPORTANT! before proceeding to power adjustment:
- Attach an electrode to each motor
- Place each electrode (fi tted with its motor) on your body
VII. START A PROGRAM
VII.A. INTRODUCTORY PROGRAM
See page 12 how to start the introductory program
Soon as you adjust the power level, the program starts
VII.b. hEALTh PROGRAM
See page 13 how to start a health program
step : Only whether the unit is connected to 3 or 4 motors
VII.C. SPORT PROGRAM
See page 14 how to start a sport program
Step : Access to "sport programs" menu
Step : Selecting the fi rst muscle zone
After selecting the fi rst muscle area, the tablet displays this screen:
1
1 Indicates the fi rst muscle area (already selected).
2
2 Indicates motor(s) associated to the fi rst muscle area.
3
Icons "front" and "back": press again to select a second muscle area.
3
4 Icon "validation": to launch the program directly with all motors on the same area.
4
(go to step ).
Step : Selecting the second muscle zone.
Step : Fitting electrodes and validation of muscle zone(s)
Step : Details of program and validation
= Warm-up phase -
Step : Adjusting power of stimulations
Step : Program in progress
22
= Active phase - = Recovery phase
VIII. SESSION IN PROGRESS
See "Session in progress" diagram - page 15
1. Motor status check
4. Working areas
2. Type of program selected
(only with sport program)
(sport / health)
5. Remaining time for the cur-
3. Program selected rent phase
"PAUSE" FUNCTION
Press the "pause" icon does not interrupt the
program, but cancels the frequency. The countdown
continues.
IX. END OF SESSION
See "End of session" diagram - IX.A.chapter - page 16
"Repeat" touchscreen icon:
health programs only
INTERRUPT A SESSION IN PROGRESS
See "Interrupt a session in progress" diagram - IX.B.chapter - page 16
X. bOOKMARKS / ADD A bOOKMARK
See page 17 ( X.A. and X.B. chapter )
XI. TEChNICAL SPECIFICATIONS
SERVICING & CLEANING RECOMMENDATIONS
Terminals:

The terminals can be cleaned with a cloth soaked
in disinfectant.
Adhesive electrodes:

Rehydrate before and after use.
If necessary, use disinfectant.
Leave on the original support base, in a plastic bag
at between 5°C and 10°C.
6. Phase in progress (warm-up,
active phase, recovery)
7. Output current frequency
8. Power indicator for active
motors
SCREENSAVER / SCREEN LOCK
The screen automatically switches to standby
during a program. The programme continues. Press
the "padlock" icon to unlock the screen.
"Add This Program To Bookmarks"
touchscreen icon (see X chapter).
TH
CONDITIONS FOR USE
Temperature: 5°C - 40°C (max. 35°C while charging)

Relative humidity: 20% - 65%

STORAGE CONDITIONS
Storage temperature: 0°C - 45°C

Relative humidity in the storage area: 10% - 90%

Keep in a dry location, away from direct sunlight.

23