Publicité
Les langues disponibles
Les langues disponibles
Field of application
The Lamello Minispot G20 milling machine can be used for cutting grooves for original Minispot patches up to 20
mm wide. The following Minispot patches are available in a variety of different woods:
Basic equipment
- Milling machine
- Tool set
- Wooden case
- Instructions for use
Technical data
Motor capacity
Speed
Cutting width max.
Cutting depth max.
Weight of machine
Use
1.
Place machine on defective place (can be checked through transparent window). Ensure support over entire
surface.
2. Press machine firmly onto work with both handles
Keep the switch in the handle pressed throughout the milling process
3. Cutting: draw cutting lever slowly to handle. The cutter enters the work
4.
Release the cutting lever
5.
Switch off machine: Let go of the switch which is integrated into the handle
6. Glue groove, e.g. with the Lamello Dosicol gluing unit with suitable Minispot nozzle
7. Press in suitable Minispot patch. The patch sits firmly in its recess from the beginning owing to the self-clamping
in the area of the flanks.
8. Following a setting time of several minutes, mill or plane the patch flush, e.g. with the Lamello Plano S45 flush-
milling machine. If the machine is used correctly, the area patched is hardly visible any more.
9881131VS_BA_G20 S2_171017.indd 11
Profile
Size
mm
2
4
22
20
20K
Special accessories (against surcharge)
- Cutting tools:
for Minispot patches size
" " "
" " "
1000 W
" " "
10'000 rpm
Stop square
20 mm
20 mm
4.4 kg
Width
Height
mm
mm
8
13
15
20
15
13
20
11
20
17
" " "
" " "
English
Length
Quantity
mm
70
500
81
200
69
200
65
160
81
55
Art. no.
2:
132217
4:
132208
22:
132209
20:
132222
20:
132220
20:
132221
121755
17.10.17 08:53
Publicité
