Work Instructions - Güde GRW 1400 Traduction Du Mode D'emploi Original

ENGLISH
12
Check all screw and plug-in connections and
protective equipment if firm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not use the device near flammable liquids or
gases. Risk of fire and explosion in case of short
circuit.

Work instructions

Do not reach into the rotating mixer (rotating
stirrer).
Hold the device firmly with two hands and away from
your body.
Avoid splashing! Work with low revolutions when im-
mersing or removing the mixed to / from the mixture
being stirred.
The stirring extensions included in the supply are
suitable for stirred materials with heavier and tougher
consistency: e.g. mortar, grouts, cement, plaster,
whitewash, concrete, screed, etc.
• Increase the revolutions when stirring. Run the mi-
xer in the mixture being stirrer until it is completely
mixed. Follow the processing instructions of the
manufacturer.
• Do not work with low revolutions in continuous
operation. This would lead to engine overload /
overheating.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only.
After each use, clean the stirring mechanism properly.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person to
avoid danger.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Disposal
Disposal instructions are illustrated in the form of
pictograms on the device or packaging. Description
of the pictograms is given in „Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected
according to their effect on environment and disposal
methods and can therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be
dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of
children and dispose as soon as possible.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureau-
cracy. Please, help us to help you. In order to identify
your device in case of complaint, please indicate serial
number, order number and year of manufacture. All
information is available on the product label. To have
all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product
in or after the warranty period must be made in the
original packaging.