10. Trouble Shooting
Problem
Rotor don't move
Rotor stops suddenly,
helicopter chrashes
The
helicopter
does
not react to the remote
control. Loss of control.
11. Disposal
Fly until the helicopter battery is completely fl at, or allow the rotors to spin until they come to a
halt. Remove the fuselage by unscrewing the two screws. Cut through each wire of the battery
seperately (to avoid short-circuits), insulate the cutted ends separately, and remove the battery.
Dispose of the exhausted battery in the appropriate manner.
12. Spare parts
Spare transmitter for Nano
Star 3, fi ts also Gcontrol
Order-No. 92404.1
Operating Instructions Nano Star 3 Gyro
Cause
•
ON/OFF switch is OFF
•
Weak helicopter battery
•
Weak helicopter battery
•
Channel selection of the transmit-
ter wrong
•
Another infrared controlled device
using the same channel
•
Affected by sunlight or other strong
light
screw
(on both sides)
Rotor blades for Nano Star 3
yellow
Order-No. 92404.2G
Solution
•
Switch ON helicopter
•
Re-cahrge battery pack
•
Re-charge battery pack
•
Reset the correct channel
•
Switch off another/own infrared de-
vice or move to another spot
•
Avoid direct sunlight or other strong
light
Connecting wire
Rotor blades for Nano Star 3
red
Order-No. 92404.3R
26