Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20 | English
supply can be used by children aged 8 or older and by
persons who have physical, sensory or mental limita-
tions or a lack of experience or knowledge if a person
responsible for their safety supervises them or has in-
structed them in the safe operation of the power sup-
ply and they understand the associated dangers. Oth-
erwise, there is a risk of operating errors and injuries.
Do not expose the power supply to rain or wet con-
ditions. Water entering the power supply will increase the
risk of electric shock.
Keep the power supply clean. Dirt poses a risk of elec-
u
tric shock.
Always check the power supply before use. Stop using
u
the power supply if you discover any damage. Do not
open the power supply yourself, and have it repaired
only by a qualified specialist using only original re-
placement parts. Damaged power supplies increase the
risk of electric shock.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for cutting metal and wood-based
materials and plastics without the use of water.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Status LED
A)
(2) USB Type-C™ port
(3) Battery charge indicator
(4) Lock-off button
(5) On/off switch
(6) Spindle lock button
(7) Hood
(8) Sanding plate/cutting disc
B)
(9) Power supply
(Country-specific)
(10) USB cable
(11) Handle (insulated gripping surface)
(12) Grinding spindle
(13) Transportation cover with integrated hex key
(14) Cutting aid
1 609 92A 5CC | (15.06.2020)
(15) Clamping bolt with washer
(16) Recess
(17) Snap-in fin
A) USB Type-C™ and USB-C™ are trademarks of USB Implementers
Forum.
B) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cut-off grinder
Article number
Rated voltage
Rated speed
Max. grinding disc dia-
meter
Max. cutting depth
Mounting diameter
Weight according to EPTA-
Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient tem-
perature during opera-
A)
tion
and during storage
Recommended power supply
– 5 V/1 A
– 5 V/2 A
– 20 V/1.35 A
For additional technical data, visit:
www.bosch-do-it.com/ecodesign
A) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according
to EN 60745-2-3.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated. Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Disc sanding:
2
2
a
< 2.5 m/s
, K = 1.5 m/s
.
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
EasyCut&Grind
3 603 JD2 0..
V=
7.2
-1
min
5800
mm
50
mm
14
mm
10
kg
0.43
°C
+10 to +35
°C
–5 to +50
2 609 120 717
1 600 A01 7L.
1 600 A01 RU.
Bosch Power Tools
Publicité
Table des Matières
