Table Des Matières - Tanaka TCG 22EAS SLP Instructions De Sécurité Et Mode D'emploi

Blade thrust may occur when
the spinning blade contacts a
solid object in the critical area. A
dangerous reaction may occur
causing the entire unit and
operator to be thrust violently.
This reaction is called blade
thrust. As a result, the operator
may lose control of the unit which
may cause serious or fatal injury.
Blade thrust is more likely to
occur in areas where it is diffi cult
to see the material to be cut.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".
Contents
WHAT IS WHAT .................................................... 4
WARNINGS AND SAFETY INSTRUCTIONS ........ 5
WARRANTY .......................................................... 6
Indicate handle location. Do
not attach handle above this
point.
Indicates blade guard location
for a trimmer head or semi-
auto cutting head.
SPECIFICATIONS ................................................. 7
ASSEMBLY PROCEDURES ................................. 9
OPERATING PROCEDURES .............................. 13
MAINTENANCE .................................................. 15
English
3