AFi LISA Série Manuel De Maintenance page 74

The shocks absorbers are located on the bottom
of the machine.
Before starting, open the lid, switch off the
centrifuge and unplug power cable
CAUTION: THE FOLLOWING
OPERATIONS MUST BE PERFORMED
BY A QUALIFIED TECHNICIAN
Step1: Extract the front panel and
remove the motor.
Step 2: Lid the centrifuge and remove
the ground cable and the screws then extract
the metal plate
Notice Originale - Rev.1.4
PROCEDURE AP2.016
SHOCKS ABSORBERS REPLACEMENT
Motor extraction
Manuel Maintenance – Lisa / Loreena
Fig 1
1/ 2