AFi LISA Série Manuel De Maintenance page 72

The motor seal is located in the bottom of the
bowl of the machine (fig 1).
Before starting, open the lid, switch off the
centrifuge and unplug power cable
CAUTION: THE FOLLOWING
OPERATIONS MUST BE PERFORMED
BY A QUALIFIED TECHNICIAN
Step 1: Remove the motor seal and
clean the throat
Step 2: Replace the new motor seal. Pay
attention to the position of the seal according
the bowl and the motor
Notice Originale - Rev.1.4
PROCEDURE AP2.011
MOTOR SEAL REPLACEMENT (VENTILATED°
Manuel Maintenance – Lisa / Loreena
Fig 1
Positioning the seal
1/ 1