Metz mecablitz 44AF-2 digital Mode D'emploi page 120

to specific details that may not be
necessarily be identical with the main
subject.
The function is activated on the came-
ra, in some instances as an individual
func-tion. The subject detail to which
the flash exposure is to be adjusted is
sighted and brought into focus with the
AF sensor/metering window in the
camera.
Pressing the camera's AE-L/AF-L button
(Nikon) or FE button (Canon - the des-
cription may vary from camera to came-
ra; see camera operating manual) cau-
ses the flash unit to fire a test flash.
The stored metering value, for example
"EL" or "FEL", is then displayed in the
k
camera viewfinder.
The camera uses the reflected light of
the test flash to determine the light
output required for the subsequent
exposure.
The actual main subject can then be
brought into focus with the camera's
AF sensor/metering window. When the
shutter release is pressed, the picture
will be exposed with the previously
defined light output of the flash unit!
120
+
In Canon cameras the flash exposure
memory FE is not supported during the
green fully-automatic programme, the
Vari programme and the subject pro-
grammes!
+
For more detailed information on
adjustments and handling, refer to the
camera's operating instructions!
+