Metz mecablitz 44AF-2 digital Mode D'emploi page 101

• Do not touch the electrical contacts of
the flash unit.
• If the housing has been damaged in
such a way that internal components
are exposed, the flash unit may no
longer be used. Remove the batte-
ries! Do not touch any internal com-
ponents.HIGH VOLTAGE!
• After a series of flashes with full
power and short intervals, a pause of
at least 3 minutes must be observed
after each series of 20 flashes!
• When taking a series of flash shots at
full light output and with rapid recy-
cling times, and with zoom positions
of 35 mm and less, the diffuser heats
up, due to the high level of thermal
energy.
• This flash unit may be used in combi-
nation with a camera-integrated flash
only if the flash can be folded out
completely.
• Rapid changes in temperature may
lead to condensation. If this occurs,
allow time for the unit to become
acclimatized.
• Do not use any toxic batteries or
rechargeable batteries!
k
101