Environmental Protection; Technical Specifications - Metabo PE 12-175 Mode D'emploi

en ENGLISH
12. Repairs
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

13. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.

14. Technical Specifications

Explanation of details on page 3. Subject to
changes serving technical progress.
D = Maximum support plate diameter
max
M = Maximum torque
t, max
M = Spindle thread
l = Length of the grinding spindle
n* = No-load speed (maximum speed)
n * = Speed at rated load
N
P = Nominal power input
1
P = Power output
2
m = Weight without mains cable
Wear ear protectors!
* High-energy, high-frequency interference can
cause speed fluctuations of up to 20%, which
subside when the interference disappears.
Machine in protection class II
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
10