M-system BPRF 960 Mode D'emploi page 92

SEMI - AUTOMATIC COOKING
This is used to switch the oven off auto-
matically after the desired cooking time
has elapsed.
There are two ways to set the semi-
automatic cooking function:
1. Set the length of time you need to
cook the food by pushing the
ton and the
to go backwards (Fig. 5.7).
This sets the desired "stop" time.
2. Set the time you need the food to stop
cooking by pushing the
the button to advance, or
backwards if you have passed the
desired time (Fig. 5.8).
AUTO and the
Then set the temperature and the cook-
ing program (see the relevant sections).
The oven is switched on and it will
switch off automatically at the end of the
desired time.
During cooking, the
on and by pressing the button
can see the time that remains until the
end of the cooking.
The cooking program can be can-
celled at any moment by pushing the
button.
92
but-
button to advance, or
or
button and
to go
symbol will be on.
symbol remains
At the end of the cooking, the oven and
the
flash and a buzzer will go off which can
be stopped by pushing any of the but-
tons.
Turn the switch and temperature knobs
to "OFF" and put the programmer onto
"manual" by pressing the
you
Fig. 5.7
Fig. 5.8
symbol will turn off, the AUTO will
A
U
T
O
A
U
T
O
button.