Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BACKGUARD
Before installing the cooker, assem-
ble the backguard "C" (fig. 7.2).
– The backguard "C" can be found
packed at the rear of the cooker.
– Before assembling remove any
protective film/adhesive tape.
– Remove the two spacers "A" and
the screw "B" from the rear of the
cooktop.
– Assemble the backguard as
shown in figure 7.2 and fix it by
screwing the central screw "B"
and the spacers "A".
FITTING THE ADJUSTABLE FEET
The adjustable feet must be fitted to
the base of the cooker before use.
Rest the rear of the cooker an a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
LEVELLING THE COOKER
The cooker may be levelled by
screwing the lower ends of the feet
IN or OUT (fig. 7.4)
c
B
A
Fig. 7.2
Fig. 7.3
Fig. 7.4
101
Publicité
Table des Matières
