M-system BPRF 960 Mode D'emploi page 104

8 - GAS SECTION
The walls adjacent to the cooker
must be of material resistant to heat.
INSTALLATION
The appliance is predisposed and
calibrated to operate with the gas
indicated on the specifications plate.
If the appliance must be alimented with
a gas different than that indicated on the
plate, it is necessary to execute the
following operations:
1) Gas connection
2) Replacement of burner injectors
3) Adjustment of the minimum of the
top burners
104
Fig. 8.1
1a) GAS CONNECTION
BE
II
Cat:
The connection must be executed to the
rear of appliance (left or right) (fig. 8.1);
the pipe do not cross the cooker.
The unused end inlet pipe of the cooker
(left or right) must be closed with the
plug interposing the gasket.
• The connection must be executed by a
qualified technician according to the
relevant standard.
2E+3+
Plug